request from: hawk
checking if we should skip the build
started at: Wed Apr 29 23:09:52 2020
fetching http://src.tld-linux.org/~builderti//srpms/4389dbd4-6e64-4058-979a-f9334ec6d3b4/perl-EV-4.27-2.src.rpm
fetched 211794 bytes, 5139.1 K/s
installing srpm: perl-EV-4.27-2.src.rpm
+ install -d /tmp/B.U9arJx/BUILD /tmp/B.U9arJx/RPMS
+ LC_ALL=en_US.UTF-8
+ rpm -qp --changelog perl-EV-4.27-2.src.rpm
* Wed Apr 29 2020 TLD Linux <feedback@tld-linux.org>
- For complete changelog see: http://git.tld-linux.org/?p=packages/perl-EV.git;a=log;h=2d97a204952a3678bb0731ab9cfb6b38f59c1fa4

* Sat Jan 25 2020 Jan Rękorajski <baggins@pld-linux.org> 2d97a20
- drop obsolete and outdated manual inclusion of rpm macros

* Wed Dec 04 2019 Jan Rękorajski <baggins@pld-linux.org> 66f5a3d
- rebuild with perl 5.30.0
- release 2 (by relup.sh)

* Thu Nov 14 2019 Arkadiusz Miśkiewicz <arekm@maven.pl> fbaa4a2
- up to 4.27

+ rpm -Uhv --nodeps --define '_topdir /tmp/B.U9arJx' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD' --without tests perl-EV-4.27-2.src.rpm
perl-EV                     ##################################################
+ rm -f perl-EV-4.27-2.src.rpm
+ install -m 700 -d /tmp/B.U9arJx/BUILD/tmp
+ TMPDIR=/tmp/B.U9arJx/BUILD/tmp
+ exec nice -n 19 rpmbuild -bp --short-circuit --nodeps --define '_topdir /tmp/B.U9arJx' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD' --without tests --target i686-tld-linux --define 'prep exit 0' /tmp/B.U9arJx/perl-EV.spec
Building target platforms: i686-tld-linux
checking BuildConflict-ing packages
no BuildConflicts found
checking BR
rpm: error: Failed build dependencies:
rpm: 	perl-common-sense is needed by perl-EV-4.27-2.src
rpm: Building target platforms: i686-tld-linux
updating poldek cache...

local is up to date

Retrieving ti::packages.ndir.md...
ti is up to date

Retrieving ti::packages.ndir.md...
ti is up to date

Retrieving ti-test::packages.ndir.md...
Retrieving ti-test::packages.ndir.diff.toc.gz...

Retrieving diff::packages.ndir.2020.04.29-20.52.01.gz...
..............................done
Retrieving diff::packages.ndir.dscr.2020.04.29-20.52.01.gz...
Loading [pndir]ti-test...
Applying packages.ndir.2020.04.29-20.52.01.gz...

Writing /root/.poldek-cache/[...]/packages.ndir.gz...

Retrieving ti-test::packages.ndir.md...
ti-test is up to date
checking conflicting packages in BRed packages
poldek: Loading [pndir]local...
poldek: Loading [pndir]ti...
poldek: Loading [pndir]ti...
poldek: Loading [pndir]ti-test...
poldek: Loading [pndir]ti-test...
poldek: 8656 packages read
poldek: Removed 704 duplicate packages from available set
poldek: Processing dependencies...
poldek: There are 1 package to install:
poldek: I perl-common-sense-3.74-7.i686
poldek: This operation will use 9.9KB of disk space.
poldek: Need to get 14.4KB of archives.
poldek: Executing pm-command.sh --upgrade -vh --test --root / --define _check_dirname_deps 1...
poldek: Preparing...                ##################################################
no conflicts found
checking BR
rpm: error: Failed build dependencies:
rpm: 	perl-common-sense is needed by perl-EV-4.27-2.src
rpm: Building target platforms: i686-tld-linux
installing BR: perl\-common\-sense
+ poldek --noask --caplookup -Q -v --upgrade perl-common-sense
Loading [pndir]local...
Loading [pndir]ti...
Loading [pndir]ti...
Loading [pndir]ti-test...
Loading [pndir]ti-test...
8656 packages read
Removed 704 duplicate packages from available set
Processing dependencies...
There are 1 package to install:
I perl-common-sense-3.74-7.i686
This operation will use 9.9KB of disk space.
Need to get 14.4KB of archives. 
Executing pm-command.sh --upgrade -vh --root / --define _check_dirname_deps 1...
Preparing...                ##################################################
perl-common-sense           ##################################################
building RPM using: set -ex; : build-id: 4389dbd4-6e64-4058-979a-f9334ec6d3b4; TMPDIR=/tmp/B.U9arJx/BUILD/tmp exec nice -n 19 rpmbuild -bb --define '_smp_mflags -j4' --define '_tld_builder 1' --define '_topdir /tmp/B.U9arJx' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD'  --without tests --target i686-tld-linux /tmp/B.U9arJx/perl-EV.spec
+ : build-id: 4389dbd4-6e64-4058-979a-f9334ec6d3b4
+ TMPDIR=/tmp/B.U9arJx/BUILD/tmp
+ exec nice -n 19 rpmbuild -bb --define '_smp_mflags -j4' --define '_tld_builder 1' --define '_topdir /tmp/B.U9arJx' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD' --without tests --target i686-tld-linux /tmp/B.U9arJx/perl-EV.spec
Building target platforms: i686-tld-linux
Executing(%prep): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.U9arJx/BUILD/tmp  /bin/sh -e /tmp/B.U9arJx/BUILD/tmp/rpm-tmp.94854
+ umask 022
+ cd /tmp/B.U9arJx/BUILD
+ cd /tmp/B.U9arJx/BUILD
+ rm -rf EV-4.27
+ /bin/tar -xf -
+ /usr/bin/gzip -dc /tmp/B.U9arJx/EV-4.27.tar.gz
+ STATUS=0 
+ '[' 0 -ne 0 ']'
+ cd EV-4.27
+ /bin/id -u
+ '[' 10001 '=' 0 ']'
+ true .
+ /bin/chmod -Rf -Rf a+rX,u+w,g-w,o-w .
+ exit 0
Executing(%build): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.U9arJx/BUILD/tmp  /bin/sh -e /tmp/B.U9arJx/BUILD/tmp/rpm-tmp.94854
TMP=/home/users/builder/tmp
HOME=/home/users/builder
PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin
TMPDIR=/tmp/B.U9arJx/BUILD/tmp
+ umask 022
+ cd /tmp/B.U9arJx/BUILD
+ cd EV-4.27
+ </dev/null 
+ /usr/bin/perl Makefile.PL 'INSTALLDIRS=vendor'

***
*** Canary::Stability COMPATIBILITY AND SUPPORT CHECK
*** =================================================
***
*** Hi!
***
*** I do my best to provide predictable and reliable software.
***
*** However, in recent releases, P5P (who maintain perl) have been
*** introducing regressions that are sometimes subtle and at other times
*** catastrophic, often for personal preferences with little or no concern
*** for existing code, most notably CPAN.
***
*** For this reason, it has become very hard for me to maintain the level
*** of reliability and support I have committed myself to in the past, at
*** least with some perl versions: I simply can't keep up working around new
*** bugs or gratituous incompatibilities, and in turn you might suffer from
*** unanticipated problems.
***
*** Therefore I have introduced a support and compatibility check, the results
*** of which follow below, together with a FAQ and some recommendations.
***
*** This check is just to let you know that there might be a risk, so you can
*** make judgement calls on how to proceed - it will not keep the module from
*** installing or working.
***
*** The stability canary says: (nothing, it was driven away by harsh weather)
***
*** It seems you are running perl version 5.030002, likely the "official" or
*** "standard" version. While there is nothing wrong with doing that,
*** standard perl versions 5.022 and up are not supported by EV.
*** While this might be fatal, it might also be all right - if you run into
*** problems, you might want to downgrade your perl or switch to the
*** stability branch.
***
*** If everything works fine, you can ignore this message.
***
*** Stability canary mini-FAQ:
***
*** Do I need to do anything?
***    With luck, no. While some distributions are known to fail
***    already, most should probably work. This message is here
***    to alert you that your perl is not supported by EV,
***    and if things go wrong, you either need to downgrade, or
***    sidegrade to the stability variant of your perl version,
***    or simply live with the consequences.
***
*** What is this canary thing?
***    It's purpose is to check support status of EV with
***    respect to your perl version.
***
*** What is this "stability branch"?
***    It's a branch or fork of the official perl, by schmorp, to
***    improve stability and compatibility with existing modules.
***
*** How can I skip this prompt on automated installs?
***    Set PERL_CANARY_STABILITY_NOPROMPT=1 in your environment.
***    More info is in the Canary::Stability manpage.
***
*** Long version of this FAQ: http://stableperl.schmorp.de/faq.html
*** Stability Branch homepage: http://stableperl.schmorp.de/
***

Continue anyways?  [y] y

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


Welcome to EV configuration. If you are in a hurry, just press return here
and hope for the best. The defaults should usually do.

Skip further questions and use defaults (y/n)? [y] y

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


POSIX optionally offers support for a monotonic clock source. EV
can take advantage of this clock source to detect time jumps more
reliably. Unfortunately, some systems are bound to be broken, so you can
disable this here: you can completely disable the detection and use of
the monotonic clock by answering 'n' here. Support for this clock type
will otherwise be autodetected at both compile- and runtime. (this setting
currently affects the use of nanosleep over select as well).

Enable optional support for CLOCK_MONOTONIC (y/n)? [y] y

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


POSIX optionally offers support for a (potentially) high-resolution
realtime clock interface. In a good implementation, using it is faster
than the normal method of using gettimeofday. Unfortunately, this option
is also bound to be broken on some systems, and current EV versions do not
actually call gettimeofday very often, so it defaults to no.

Prefer clock_gettime (CLOCK_REALTIME) over gettimeofday (y/n)? [n] n

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


EV can use various backends with various portability issues. The select
backend is the most portable and makes for a good fallback, but it can be
limited to a low number of file descriptors and/or might not compile. If
you have problems with compiling ev_select.c, you might try to play around
with disabling it here, or forcing it to use the fd_set provided by your
OS, via the next question. I highly recommend keeping it in.

Enable select backend (y/n)? [y] y

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


The select backend can operate in two modes. One uses the system-provided
fd_set and is usually limited to 1024 file descriptors (64 on windows),
the other requires your header files to define NFDBITS and declare a
suitable fd_mask type. If you run into problems compiling ev_select.c, you
can try forcing the use of the system fd_set here.

Force use of system fd_set for select backend (y/n)? [n] n

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


The second very portable backend is poll(2). It does not exist on windows
and various versions of Mac OS X (and on the other versions it simply
doesn't work), but works basically everywhere else. It is recommended to use
the default here unless you run into compile problems in ev_poll.c.

Enable poll backend (y/n)? [y] y

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


Select and poll make it hard to write efficient servers, especially if the
number of active connections is much lower than the watched ones. GNU/Linux
systems have a more scalable method called "epoll", which EV can use. For
this to work, both your kernel and glibc have to support epoll, but if you
can compile it, the detection will be done at runtime, and EV will safely
fall back to using select when epoll isn't available. If unsure, accept
the default.

Enable epoll backend (y/n)? [y] y

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


Linux 4.18 introduced another event polling interface, this time using
the Linux AIO API. While this API is far superior to epoll and almost
rivals kqueue, it also suffers from the same issues as kqueue typically
does: only a subset of file types are supported (as of 4.19, I have seen
eventfd, pipes, sockets files and some devices, but no ttys). It also
is subject arbitrary system-wide limits imposed on it. Therefore, this
backend is not used by default, even when it is compiled in, and you have
to request it explicitly, e.g. with LIBEV_FLAGS=64. If unsure, accept the
default.

Enable linux aio backend (y/n)? [y] y

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


The previously mentioned Linux AIO backend is experimental and will not
be used unless requested explicitly. You can, howeer, choose to make ti a
recommended basckend, which means it will be chosen if available even when
not explicitly asked for, in preference to epoll on GNU/Linux. This option
is likely temporary. When unsure, accept the default.

Treat linux aio as a recommended backend (y/n)? [n] n

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


Similarly to the epoll backend above, EV can take advantage of kqueue on
many BSD systems. Support for kqueue will be detected at runtime, with a
safe fallback to other methods when it cannot be used.

Note that kqueue is broken on most operating systems, so by default it
won't be used on many platforms, but you can still create your own event
loop with kqueue backend if you ask specifically for it.

Here is what we know:

NetBSD:  partially working in at least 3.1 and later. Yeah! :)
FreeBSD: broken on at least 6.2-STABLE, spotty in later versions,
         sockets *likely* work, ptys definitely don't.
OpenBSD: reports indicate that it likely doesn't work
         (similar problems as on FreeBSD).
OS X:    completely, utterly broken on at least <= 10.6.

Enable kqueue backend (y/n)? [n] n

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


Similarly to the kqueue backend above, EV can take advantage of the
solaris 10 event port interface. Support for event ports will be detected
at runtime, with a safe fallback to other methods when it cannot be used.

Enable event port backend (y/n)? [n] n

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


EV needs the functions pthread_atfork and clock_gettime. On most systems
you need some special libraries for this (such as -lrt and -lpthread). You
can specify additional libraries to provide these calls (and any other
required by EV) now, or accept the default.

On GNU/Linux systems, EV uses the LSB 3.1 __register_atfork function
to avoid the dependency on libpthread, and directly uses the clock_gettime
syscall to avoid a dependency on librt.

Extra libraries for pthread_atfork and clock_gettime? [ ]  

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


A backend of a different kind is the Linux inotify(7) interface, which can
be used to speed up (and reduce resource consumption) of stat watchers. If
you have the include file and libc support for it, it is usually a good
idea to enable it, as kernel availability is detected at runtime.

Enable inotify support (y/n)? [y] y

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


Another useful bit of functionality is the Linux eventfd, which is useful
for faster signal handling (don't care) and intra-thread communications
(more relevant). Kernel support for this will be probed at runtime, but
your libc must contain the necessary wrapper. Glibc 2.7 and later should
have this wrapper.

Enable linux eventfd support (y/n)? [y] y

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


Another sometimes useful bit of functionality is the Linux signalfd, which
is useful for faster signal handling (don't care). Kernel support for
this will be probed at runtime, but your libc must contain the necessary
wrapper. Glibc 2.7 and later should have this wrapper.

Enable linux signalfd support (y/n)? [y] y

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


Libev contains numerous internal assert() invocations to check for
consistency and user errors. These are normally enabled, but most
perl builds disable this error reporting mechanism by default. You
can re-enable these asserts here. Enabling them might help you catch
programming bugs earlier, but might cause a small slowdown. Also, failures
will be reported by aboritng your program, instead of throwing a perl
exception.

If unsure, enable this if you only use this perl installation for
development, and leave it off for use in production environments.

Make sure assertions are enabled? (y/n)? [n] n

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


Very rarely, people want to tweak EV even more, e.g. to exclude
or include certain watcher types or backends. This can be done by adding
extra -D options here, or via the EV_EXTRA_DEFS environment variable.

For example, if you run into compile problems because of missing memory
fences (or you just want extra performance), you can tell EV to not support
smp and threads via -DEV_NO_THREADS.

Normal persons just press enter.

Any extra -D options? [] 

*** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***


Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for EV
Writing MYMETA.yml and MYMETA.json
+ /usr/bin/make -j4 'CC=i686-tld-linux-gcc' 'OPTIMIZE=-O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4 '
Running Mkbootstrap for EV ()
"/usr/bin/perl5.30.2" "/usr/share/perl5/5.30.2/ExtUtils/xsubpp"  -typemap '/usr/share/perl5/5.30.2/ExtUtils/typemap' -typemap '/tmp/B.U9arJx/BUILD/EV-4.27/typemap'  EV.xs > EV.xsc
chmod 644 "EV.bs"
"/usr/bin/perl5.30.2" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs blib/arch/auto/EV/EV.bs 644
cp EV/EVAPI.h blib/lib/EV/EVAPI.h
cp EV.pm blib/lib/EV.pm
cp libev/ev.h blib/lib/EV/ev.h
cp libev/ev.pod blib/lib/EV/libev.pod
cp EV/MakeMaker.pm blib/lib/EV/MakeMaker.pm
mv EV.xsc EV.c
i686-tld-linux-gcc -c  -Ilibev -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4    -DVERSION=\"4.27\" -DXS_VERSION=\"4.27\" -fPIC "-I/usr/lib/perl5/5.30.2/i686-tld-linux-thread-multi/CORE"  -DEV_USE_REALTIME=0 -DEV_USE_SELECT=1 -DEV_USE_POLL=1 -DEV_USE_EPOLL=1 -DEV_USE_LINUXAIO=1 -DEV_RECOMMEND_LINUXAIO=0 -DEV_USE_KQUEUE=0 -DEV_USE_PORT=0 -DEV_USE_INOTIFY=1 -DEV_USE_EVENTFD=1 -DEV_USE_SIGNALFD=1  EV.c
In file included from EV.xs:45:
libev/ev.c: In function 'evpipe_write':
libev/ev.c:2507:11: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result]
 2507 |           write (evpipe [1], &counter, sizeof (uint64_t));
      |           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
libev/ev.c:2519:11: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result]
 2519 |           write (evpipe [1], &(evpipe [1]), 1);
      |           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
libev/ev.c: In function 'pipecb':
libev/ev.c:2540:11: warning: ignoring return value of 'read', declared with attribute warn_unused_result [-Wunused-result]
 2540 |           read (evpipe [1], &counter, sizeof (uint64_t));
      |           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
libev/ev.c:2554:11: warning: ignoring return value of 'read', declared with attribute warn_unused_result [-Wunused-result]
 2554 |           read (evpipe [0], &dummy, sizeof (dummy));
      |           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
rm -f blib/arch/auto/EV/EV.so
i686-tld-linux-gcc  -shared   -Wl,--no-copy-dt-needed-entries -Wl,-z,relro -Wl,-z,combreloc  -L/usr/local/lib -fstack-protector-strong  EV.o  -o blib/arch/auto/EV/EV.so  \
      \
  
chmod 755 blib/arch/auto/EV/EV.so
Manifying 3 pod documents
+ exit 0
Executing(%install): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.U9arJx/BUILD/tmp  /bin/sh -e /tmp/B.U9arJx/BUILD/tmp/rpm-tmp.10720
TMP=/home/users/builder/tmp
HOME=/home/users/builder
PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin
TMPDIR=/tmp/B.U9arJx/BUILD/tmp
+ umask 022
+ cd /tmp/B.U9arJx/BUILD
+ /bin/rm '--interactive=never' -rf /tmp/B.U9arJx/BUILD/tmp/perl-EV-4.27-root-builder
+ /bin/mkdir -p /tmp/B.U9arJx/BUILD/tmp/perl-EV-4.27-root-builder
+ cd EV-4.27
+ rm -rf /tmp/B.U9arJx/BUILD/tmp/perl-EV-4.27-root-builder
+ /usr/bin/make -j4 pure_install 'DESTDIR=/tmp/B.U9arJx/BUILD/tmp/perl-EV-4.27-root-builder'
"/usr/bin/perl5.30.2" -MExtUtils::Command::MM -e 'cp_nonempty' -- EV.bs blib/arch/auto/EV/EV.bs 644
Manifying 3 pod documents
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /tmp/B.U9arJx/BUILD/tmp/perl-EV-4.27-root-builder/usr/lib/perl5/vendor_perl/5.30.0/i686-tld-linux-thread-multi/auto/EV/EV.so
Installing /tmp/B.U9arJx/BUILD/tmp/perl-EV-4.27-root-builder/usr/lib/perl5/vendor_perl/5.30.0/i686-tld-linux-thread-multi/EV.pm
Installing /tmp/B.U9arJx/BUILD/tmp/perl-EV-4.27-root-builder/usr/lib/perl5/vendor_perl/5.30.0/i686-tld-linux-thread-multi/EV/EVAPI.h
Installing /tmp/B.U9arJx/BUILD/tmp/perl-EV-4.27-root-builder/usr/lib/perl5/vendor_perl/5.30.0/i686-tld-linux-thread-multi/EV/ev.h
Installing /tmp/B.U9arJx/BUILD/tmp/perl-EV-4.27-root-builder/usr/lib/perl5/vendor_perl/5.30.0/i686-tld-linux-thread-multi/EV/MakeMaker.pm
Installing /tmp/B.U9arJx/BUILD/tmp/perl-EV-4.27-root-builder/usr/lib/perl5/vendor_perl/5.30.0/i686-tld-linux-thread-multi/EV/libev.pod
Installing /tmp/B.U9arJx/BUILD/tmp/perl-EV-4.27-root-builder/usr/share/man/man3/EV::MakeMaker.3pm
Installing /tmp/B.U9arJx/BUILD/tmp/perl-EV-4.27-root-builder/usr/share/man/man3/EV.3pm
Installing /tmp/B.U9arJx/BUILD/tmp/perl-EV-4.27-root-builder/usr/share/man/man3/EV::libev.3pm
+ install -d libev-doc
+ mv -f libev/Changes libev/LICENSE libev/README libev-doc
+ /bin/rm '--interactive=never' /tmp/B.U9arJx/BUILD/tmp/perl-EV-4.27-root-builder/usr/lib/perl5/vendor_perl/5.30.0/i686-tld-linux-thread-multi/EV/libev.pod
+ __spec_install_post_strip
+ set +x
Stripping 1 ELF shared libraries...DONE
+ __spec_install_post_chrpath
+ set +x
Remove RPATH/RUNPATH from 1 executable binaries and shared object files.
+ __spec_install_post_check_so
+ set +x
Searching for shared objects with unresolved symbols... DONE
+ __spec_install_post_check_tmpfiles
+ set +x
Checking /var/run <-> tmpfiles.d completeness...
 DONE
+ __spec_install_post_compress_docs
+ set +x
Compress man pages: /usr/share/man
+ __spec_install_post_compress_modules
+ set +x
+ __spec_install_post_py_hardlink
+ set +x
+ rm -f /tmp/B.U9arJx/BUILD/tmp/perl-EV-4.27-root-builder/usr/lib/perl5/5.30.2/i686-tld-linux-thread-multi/perllocal.pod /tmp/B.U9arJx/BUILD/tmp/perl-EV-4.27-root-builder/usr/lib/perl5/vendor_perl/5.30.0/i686-tld-linux-thread-multi/auto/EV/.packlist
Processing files: perl-EV-4.27-2
Executing(%doc): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.U9arJx/BUILD/tmp  /bin/sh -e /tmp/B.U9arJx/BUILD/tmp/rpm-tmp.42269
+ umask 022
+ cd /tmp/B.U9arJx/BUILD
+ cd EV-4.27
+ DOCDIR=/tmp/B.U9arJx/BUILD/tmp/perl-EV-4.27-root-builder/usr/share/doc/perl-EV-4.27 
+ export DOCDIR
+ rm -rf /tmp/B.U9arJx/BUILD/tmp/perl-EV-4.27-root-builder/usr/share/doc/perl-EV-4.27
+ /bin/mkdir -p /tmp/B.U9arJx/BUILD/tmp/perl-EV-4.27-root-builder/usr/share/doc/perl-EV-4.27
+ /usr/lib/rpm/compress-doc
Compressing documentation in /tmp/B.U9arJx/BUILD/tmp/perl-EV-4.27-root-builder/usr/share/doc/perl-EV-4.27...

Documentation compressed.
+ cp -pr Changes COPYING README libev-doc /tmp/B.U9arJx/BUILD/tmp/perl-EV-4.27-root-builder/usr/share/doc/perl-EV-4.27
+ /usr/lib/rpm/compress-doc
Compressing documentation in /tmp/B.U9arJx/BUILD/tmp/perl-EV-4.27-root-builder/usr/share/doc/perl-EV-4.27...
./COPYING ./README ./Changes ./libev-doc/README ./libev-doc/Changes ./libev-doc/LICENSE 
Documentation compressed.
+ exit 0
Provides: EV.so perl(EV) = 4.27 perl(EV::MakeMaker)
Requires(rpmlib): rpmlib(VersionedDependencies) <= 3.0.3-1
Requires: /usr/lib/perl5/vendor_perl/5.30.0/i686-tld-linux-thread-multi libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.17) libc.so.6(GLIBC_2.2) libc.so.6(GLIBC_2.28) libc.so.6(GLIBC_2.3.2) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libc.so.6(GLIBC_2.9) perl(Config) perl(Exporter) perl(XSLoader) perl(common::sense) rtld(GNU_HASH)
Checking for unpackaged file(s): /usr/lib/rpm/check-files /tmp/B.U9arJx/BUILD/tmp/perl-EV-4.27-root-builder
Wrote: /tmp/B.U9arJx/RPMS/perl-EV-4.27-2.i686.rpm
Executing(%clean): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.U9arJx/BUILD/tmp  /bin/sh -e /tmp/B.U9arJx/BUILD/tmp/rpm-tmp.42269
+ umask 022
+ cd /tmp/B.U9arJx/BUILD
+ cd EV-4.27
+ /bin/rm '--interactive=never' -rf /tmp/B.U9arJx/BUILD/tmp/perl-EV-4.27-root-builder
+ rm -rf /tmp/B.U9arJx/BUILD/tmp/perl-EV-4.27-root-builder
ended at: Wed Apr 29 23:10:00 2020, done in 0:00:04.850272
+ chmod -R u+rwX /tmp/B.U9arJx/BUILD
+ rm -rf /tmp/B.U9arJx/tmp /tmp/B.U9arJx/BUILD
copy rpm files to cache_dir: /spools/ready
Creating pndir index of /spools/ready/ (type=dir)...
Loading [pndir]previous /spools/ready/packages.ndir.gz...
Loading [dir]/spools/ready/...
200..288
Writing /spools/ready/packages.ndir.gz...
Begin-TLD-Builder-Info
upgrading packages
End-TLD-Builder-Info
+ rm -rf /tmp/B.U9arJx
Begin-TLD-Builder-Info
Build-Time: user:7.08s sys:0.88s real:8.41s (faults io:0 non-io:175797)

Files queued for ftp:
    215031 perl-EV-4.27-2.i686.rpm
        72 perl-EV-4.27-2.src.rpm.uploadinfo

End-TLD-Builder-Info