request from: hawk
checking if we should skip the build
started at: Sun Aug 14 00:03:32 2016
fetching http://kraz.tld-linux.org/~builderti//srpms/c67100f0-1e6e-40d4-9e0b-5c481cb02de2/smartmontools-6.5-1.src.rpm
fetched 872577 bytes, 637.5 K/s
installing srpm: smartmontools-6.5-1.src.rpm
mesg: ttyname failed: Inappropriate ioctl for device
+ install -d /tmp/B.DINro_/BUILD /tmp/B.DINro_/RPMS
+ LC_ALL=en_US.UTF-8
+ rpm -qp --changelog smartmontools-6.5-1.src.rpm
* Sat Aug 13 2016 TLD Linux <feedback@tld-linux.org>
- For complete changelog see: http://git.tld-linux.org/?p=packages/smartmontools.git;a=log;h=master

* Sat Aug 13 2016 Marcin Krol <hawk@tld-linux.org> 3dda0af
- updated to 6.5, partial PLD merge

+ rpm -Uhv --nodeps --define '_topdir /tmp/B.DINro_' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD' smartmontools-6.5-1.src.rpm
smartmontools               ##################################################
+ rm -f smartmontools-6.5-1.src.rpm
mesg: ttyname failed: Inappropriate ioctl for device
+ install -m 700 -d /tmp/B.DINro_/BUILD/tmp
mesg: ttyname failed: Inappropriate ioctl for device
+ TMPDIR=/tmp/B.DINro_/BUILD/tmp
+ exec nice -n 19 rpmbuild -bp --short-circuit --nodeps --define '_topdir /tmp/B.DINro_' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD' --target i686-tld-linux --define 'prep exit 0' /tmp/B.DINro_/smartmontools.spec
Building target platforms: i686-tld-linux
checking BuildConflict-ing packages
no BuildConflicts found
checking BR
rpm: Building target platforms: i686-tld-linux
no BR needed
building RPM using: set -ex; : build-id: c67100f0-1e6e-40d4-9e0b-5c481cb02de2; TMPDIR=/tmp/B.DINro_/BUILD/tmp exec nice -n 19 rpmbuild -bb --define '_smp_mflags -j4' --define '_tld_builder 1' --define '_topdir /tmp/B.DINro_' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD'  --target i686-tld-linux /tmp/B.DINro_/smartmontools.spec
mesg: ttyname failed: Inappropriate ioctl for device
+ : build-id: c67100f0-1e6e-40d4-9e0b-5c481cb02de2
+ TMPDIR=/tmp/B.DINro_/BUILD/tmp
+ exec nice -n 19 rpmbuild -bb --define '_smp_mflags -j4' --define '_tld_builder 1' --define '_topdir /tmp/B.DINro_' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD' --target i686-tld-linux /tmp/B.DINro_/smartmontools.spec
Building target platforms: i686-tld-linux
Executing(%prep): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.DINro_/BUILD/tmp  /bin/sh -e /tmp/B.DINro_/BUILD/tmp/rpm-tmp.13868
+ umask 022
+ cd /tmp/B.DINro_/BUILD
+ cd /tmp/B.DINro_/BUILD
+ rm -rf smartmontools-6.5
+ tar -xf -
+ /usr/bin/gzip -dc /tmp/B.DINro_/smartmontools-6.5.tar.gz
+ STATUS=0 
+ '[' 0 -ne 0 ']'
+ cd smartmontools-6.5
+ /bin/id -u
+ '[' 10001 '=' 0 ']'
+ true .
+ /bin/chmod -Rf -Rf a+rX,u+w,g-w,o-w .
+ echo 'Patch #0 (53_use-smartd-runner-by-default.diff):'
Patch #0 (53_use-smartd-runner-by-default.diff):
+ </tmp/B.DINro_/53_use-smartd-runner-by-default.diff 
+ patch -p1 -s
+ exit 0
Executing(%build): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.DINro_/BUILD/tmp  /bin/sh -e /tmp/B.DINro_/BUILD/tmp/rpm-tmp.13868
TMP=/home/users/builder/tmp
HOME=/home/users/builder
PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin
TMPDIR=/tmp/B.DINro_/BUILD/tmp
+ umask 022
+ cd /tmp/B.DINro_/BUILD
+ cd smartmontools-6.5
+ aclocal
+ autoconf
+ autoheader
+ automake -a -c -f --foreign
Makefile.am:198: warning: source file 'getopt/getopt.c' is in a subdirectory,
Makefile.am:198: but option 'subdir-objects' is disabled
automake: warning: possible forward-incompatibility.
automake: At least a source file is in a subdirectory, but the 'subdir-objects'
automake: automake option hasn't been enabled.  For now, the corresponding output
automake: object file(s) will be placed in the top-level directory.  However,
automake: this behaviour will change in future Automake versions: they will
automake: unconditionally cause object files to be placed in the same subdirectory
automake: of the corresponding sources.
automake: You are advised to start using 'subdir-objects' option throughout your
automake: project, to avoid future incompatibilities.
Makefile.am:198: warning: source file 'getopt/getopt1.c' is in a subdirectory,
Makefile.am:198: but option 'subdir-objects' is disabled
Makefile.am:212: warning: source file 'regex/regex.c' is in a subdirectory,
Makefile.am:212: but option 'subdir-objects' is disabled
Makefile.am:237: warning: source file 'os_win32/wmiquery.cpp' is in a subdirectory,
Makefile.am:237: but option 'subdir-objects' is disabled
Makefile.am:223: warning: source file 'regex/regcomp.c' is in a subdirectory,
Makefile.am:223: but option 'subdir-objects' is disabled
Makefile.am:223: warning: source file 'regex/regexec.c' is in a subdirectory,
Makefile.am:223: but option 'subdir-objects' is disabled
Makefile.am:223: warning: source file 'regex/regex_internal.c' is in a subdirectory,
Makefile.am:223: but option 'subdir-objects' is disabled
Makefile.am:181: warning: source file 'os_win32/daemon_win32.cpp' is in a subdirectory,
Makefile.am:181: but option 'subdir-objects' is disabled
Makefile.am:181: warning: source file 'os_win32/syslog_win32.cpp' is in a subdirectory,
Makefile.am:181: but option 'subdir-objects' is disabled
Makefile.am:203: warning: source file 'getopt/getopt.c' is in a subdirectory,
Makefile.am:203: but option 'subdir-objects' is disabled
Makefile.am:203: warning: source file 'getopt/getopt1.c' is in a subdirectory,
Makefile.am:203: but option 'subdir-objects' is disabled
Makefile.am:217: warning: source file 'regex/regex.c' is in a subdirectory,
Makefile.am:217: but option 'subdir-objects' is disabled
Makefile.am:242: warning: source file 'os_win32/wmiquery.cpp' is in a subdirectory,
Makefile.am:242: but option 'subdir-objects' is disabled
Makefile.am:228: warning: source file 'regex/regcomp.c' is in a subdirectory,
Makefile.am:228: but option 'subdir-objects' is disabled
Makefile.am:228: warning: source file 'regex/regexec.c' is in a subdirectory,
Makefile.am:228: but option 'subdir-objects' is disabled
Makefile.am:228: warning: source file 'regex/regex_internal.c' is in a subdirectory,
Makefile.am:228: but option 'subdir-objects' is disabled
+ ./configure 'LDFLAGS=-Wl,--as-needed -Wl,--no-copy-dt-needed-entries -Wl,-z,relro -Wl,-z,combreloc ' 'CFLAGS=-O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4 ' 'CXXFLAGS=-O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4 ' 'FFLAGS=-O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4 ' 'FCFLAGS=-O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4 ' 'CPPFLAGS=' 'CC=i686-tld-linux-gcc' 'CXX=i686-tld-linux-g++' '--host=i686-tld-linux' '--build=i686-tld-linux' '--prefix=/usr' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib' '--libexecdir=/usr/lib' '--localstatedir=/var' '--sharedstatedir=/var/lib' '--mandir=/usr/share/man' '--infodir=/usr/share/info' '--x-libraries=/usr/lib' --with-libcap-ng --with-selinux '--with-savestates=/var/lib/smartmontools/smartd.' '--with-attributelog=/var/lib/smartmontools/attrlog.' '--with-drivedbdir=/var/lib/smartmontools/drivedb' '--with-smartdscriptdir=/usr/share/smartmontools' '--with-smartdplugindir=/etc/smartmontools/smartd_warning.d'
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables... 
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether i686-tld-linux-g++ accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of i686-tld-linux-g++... gcc3
checking for i686-tld-linux-gcc... i686-tld-linux-gcc
checking whether we are using the GNU C compiler... yes
checking whether i686-tld-linux-gcc accepts -g... yes
checking for i686-tld-linux-gcc option to accept ISO C89... none needed
checking whether i686-tld-linux-gcc understands -c and -o together... yes
checking dependency style of i686-tld-linux-gcc... gcc3
checking dependency style of i686-tld-linux-gcc... gcc3
checking for i686-tld-linux-pkg-config... no
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking build system type... i686-tld-linux-gnu
checking host system type... i686-tld-linux-gnu
checking whether this is a build from SVN... no
checking how to run the C++ preprocessor... i686-tld-linux-g++ -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking dev/ata/atavar.h usability... no
checking dev/ata/atavar.h presence... no
checking for dev/ata/atavar.h... no
checking for inttypes.h... (cached) yes
checking for stdint.h... (cached) yes
checking sys/inttypes.h usability... no
checking sys/inttypes.h presence... no
checking for sys/inttypes.h... no
checking sys/int_types.h usability... no
checking sys/int_types.h presence... no
checking for sys/int_types.h... no
checking sys/tweio.h usability... no
checking sys/tweio.h presence... no
checking for sys/tweio.h... no
checking sys/twereg.h usability... no
checking sys/twereg.h presence... no
checking for sys/twereg.h... no
checking sys/tw_osl_ioctl.h usability... no
checking sys/tw_osl_ioctl.h presence... no
checking for sys/tw_osl_ioctl.h... no
checking linux/compiler.h usability... no
checking linux/compiler.h presence... no
checking for linux/compiler.h... no
checking dev/ciss/cissio.h usability... no
checking dev/ciss/cissio.h presence... no
checking for dev/ciss/cissio.h... no
checking for linux/cciss_ioctl.h... yes
checking for ntdddisk.h... no
checking for ddk/ntdddisk.h... no
checking wbemcli.h usability... no
checking wbemcli.h presence... no
checking for wbemcli.h... no
checking for int64_t... yes
checking for uint64_t... yes
checking for getopt_long... yes
checking for regcomp... yes
checking for sigset... yes
checking for strtoull... yes
checking for uname... yes
checking for clock_gettime... yes
checking for ftime... yes
checking for gettimeofday... yes
checking whether byte ordering is bigendian... no
checking whether i686-tld-linux-g++ supports __attribute__((packed))... yes
checking for systemdsystemunitdir... no
checking for init (rc) directory... ${sysconfdir}/rc.d/init.d
checking selinux/selinux.h usability... yes
checking selinux/selinux.h presence... yes
checking for selinux/selinux.h... yes
checking for matchpathcon in -lselinux... yes
checking for capng_clear in -lcap-ng... yes
checking cap-ng.h usability... yes
checking cap-ng.h presence... yes
checking for cap-ng.h... yes
checking whether to use libcap-ng... yes
checking whether os_linux.cpp uses new interface... yes
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating config.h
config.status: executing depfiles commands
checking whether make sets $(MAKE)... (cached) yes
configure:
-----------------------------------------------------------------------------
smartmontools-6.5 configuration:
host operating system:  i686-tld-linux-gnu
C++ compiler:           i686-tld-linux-g++
C compiler:             i686-tld-linux-gcc
preprocessor flags:     
C++ compiler flags:     -O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4  -Wall -W
C compiler flags:       -O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4 
linker flags:           -Wl,--as-needed -Wl,--no-copy-dt-needed-entries -Wl,-z,relro -Wl,-z,combreloc 
OS specific modules:    os_linux.o cciss.o dev_areca.o  -lselinux 
binary install path:    /usr/sbin
man page install path:  /usr/share/man
doc file install path:  /usr/share/doc/smartmontools
examples install path:  /usr/share/doc/smartmontools/examplescripts
drive database file:    /var/lib/smartmontools/drivedb/drivedb.h
database update script: /usr/sbin/update-smart-drivedb
download tools:         curl wget lynx svn
local drive database:   /etc/smart_drivedb.h
smartd config file:     /etc/smartd.conf
smartd warning script:  /usr/share/smartmontools/smartd_warning.sh
smartd plugin path:     /etc/smartmontools/smartd_warning.d
smartd initd script:    /etc/rc.d/init.d/smartd.initd
smartd save files:      /var/lib/smartmontools/smartd.MODEL-SERIAL.TYPE.state
smartd attribute logs:  /var/lib/smartmontools/attrlog.MODEL-SERIAL.TYPE.csv
libcap-ng support:      yes
SELinux support:        yes
NVMe DEVICESCAN:        no
-----------------------------------------------------------------------------

configure: WARNING:
This version of smartmontools provides NVMe support which is still
EXPERIMENTAL.  NVMe devices are not yet included in smartd.conf
'DEVICESCAN' and 'smartctl --scan' unless '-d nvme' is specified.
Use option '--with-nvme-devicescan' to include NVMe devices.
Use option '--without-nvme-devicescan' to suppress this warning.
+ /usr/bin/make -j4
/usr/bin/make  all-am
make[1]: Entering directory `/tmp/B.DINro_/BUILD/smartmontools-6.5'
i686-tld-linux-g++ -DHAVE_CONFIG_H -I.  -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."'      -O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4  -Wall -W -MT smartctl.o -MD -MP -MF .deps/smartctl.Tpo -c -o smartctl.o smartctl.cpp
i686-tld-linux-g++ -DHAVE_CONFIG_H -I.  -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."'      -O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4  -Wall -W -MT atacmdnames.o -MD -MP -MF .deps/atacmdnames.Tpo -c -o atacmdnames.o atacmdnames.cpp
i686-tld-linux-g++ -DHAVE_CONFIG_H -I.  -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."'      -O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4  -Wall -W -MT atacmds.o -MD -MP -MF .deps/atacmds.Tpo -c -o atacmds.o atacmds.cpp
i686-tld-linux-g++ -DHAVE_CONFIG_H -I.  -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."'      -O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4  -Wall -W -MT ataidentify.o -MD -MP -MF .deps/ataidentify.Tpo -c -o ataidentify.o ataidentify.cpp
mv -f .deps/atacmdnames.Tpo .deps/atacmdnames.Po
i686-tld-linux-g++ -DHAVE_CONFIG_H -I.  -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."'      -O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4  -Wall -W -MT ataprint.o -MD -MP -MF .deps/ataprint.Tpo -c -o ataprint.o ataprint.cpp
mv -f .deps/ataidentify.Tpo .deps/ataidentify.Po
i686-tld-linux-g++ -DHAVE_CONFIG_H -I.  -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."'      -O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4  -Wall -W -MT dev_ata_cmd_set.o -MD -MP -MF .deps/dev_ata_cmd_set.Tpo -c -o dev_ata_cmd_set.o dev_ata_cmd_set.cpp
mv -f .deps/dev_ata_cmd_set.Tpo .deps/dev_ata_cmd_set.Po
i686-tld-linux-g++ -DHAVE_CONFIG_H -I.  -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."'      -O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4  -Wall -W -MT dev_interface.o -MD -MP -MF .deps/dev_interface.Tpo -c -o dev_interface.o dev_interface.cpp
mv -f .deps/dev_interface.Tpo .deps/dev_interface.Po
i686-tld-linux-g++ -DHAVE_CONFIG_H -I.  -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."'      -O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4  -Wall -W -MT knowndrives.o -MD -MP -MF .deps/knowndrives.Tpo -c -o knowndrives.o knowndrives.cpp
mv -f .deps/smartctl.Tpo .deps/smartctl.Po
i686-tld-linux-g++ -DHAVE_CONFIG_H -I.  -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."'      -O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4  -Wall -W -MT nvmecmds.o -MD -MP -MF .deps/nvmecmds.Tpo -c -o nvmecmds.o nvmecmds.cpp
mv -f .deps/atacmds.Tpo .deps/atacmds.Po
i686-tld-linux-g++ -DHAVE_CONFIG_H -I.  -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."'      -O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4  -Wall -W -MT nvmeprint.o -MD -MP -MF .deps/nvmeprint.Tpo -c -o nvmeprint.o nvmeprint.cpp
mv -f .deps/nvmecmds.Tpo .deps/nvmecmds.Po
i686-tld-linux-g++ -DHAVE_CONFIG_H -I.  -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."'      -O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4  -Wall -W -MT scsicmds.o -MD -MP -MF .deps/scsicmds.Tpo -c -o scsicmds.o scsicmds.cpp
mv -f .deps/nvmeprint.Tpo .deps/nvmeprint.Po
i686-tld-linux-g++ -DHAVE_CONFIG_H -I.  -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."'      -O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4  -Wall -W -MT scsiata.o -MD -MP -MF .deps/scsiata.Tpo -c -o scsiata.o scsiata.cpp
mv -f .deps/ataprint.Tpo .deps/ataprint.Po
i686-tld-linux-g++ -DHAVE_CONFIG_H -I.  -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."'      -O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4  -Wall -W -MT scsiprint.o -MD -MP -MF .deps/scsiprint.Tpo -c -o scsiprint.o scsiprint.cpp
mv -f .deps/knowndrives.Tpo .deps/knowndrives.Po
 cat ChangeLog NEWS $(SOURCES) | $(VERSION_FROM_SVN_IDS) > svnversion.h
i686-tld-linux-g++ -DHAVE_CONFIG_H -I.  -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."'      -O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4  -Wall -W -MT os_linux.o -MD -MP -MF .deps/os_linux.Tpo -c -o os_linux.o os_linux.cpp
mv -f .deps/scsicmds.Tpo .deps/scsicmds.Po
i686-tld-linux-g++ -DHAVE_CONFIG_H -I.  -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."'      -O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4  -Wall -W -MT cciss.o -MD -MP -MF .deps/cciss.Tpo -c -o cciss.o cciss.cpp
mv -f .deps/cciss.Tpo .deps/cciss.Po
i686-tld-linux-g++ -DHAVE_CONFIG_H -I.  -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."'      -O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4  -Wall -W -MT dev_areca.o -MD -MP -MF .deps/dev_areca.Tpo -c -o dev_areca.o dev_areca.cpp
mv -f .deps/scsiprint.Tpo .deps/scsiprint.Po
i686-tld-linux-g++ -DHAVE_CONFIG_H -I.  -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."'      -O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4  -Wall -W -MT smartd.o -MD -MP -MF .deps/smartd.Tpo -c -o smartd.o smartd.cpp
mv -f .deps/scsiata.Tpo .deps/scsiata.Po
/bin/sh ./config.status --file=update-smart-drivedb
config.status: creating update-smart-drivedb
chmod +x update-smart-drivedb
/bin/sh ./config.status --file=smartd_warning.sh
mv -f .deps/dev_areca.Tpo .deps/dev_areca.Po
 $(MAN_FILTER) < ./smartd.conf.5.in > smartd.conf.5
 $(MAN_FILTER) < ./smartctl.8.in > smartctl.8
 $(MAN_FILTER) < ./smartd.8.in > smartd.8
config.status: creating smartd_warning.sh
 $(MAN_FILTER) < ./update-smart-drivedb.8.in > update-smart-drivedb.8
chmod +x smartd_warning.sh
sed 's|/usr/local/sbin/|/usr/sbin/|g' ./smartd.initd.in > smartd.initd
i686-tld-linux-g++ -DHAVE_CONFIG_H -I.  -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/share/smartmontools"' -DSMARTMONTOOLS_DRIVEDBDIR='"/var/lib/smartmontools/drivedb"' -DSMARTMONTOOLS_SAVESTATES='"/var/lib/smartmontools/smartd."' -DSMARTMONTOOLS_ATTRIBUTELOG='"/var/lib/smartmontools/attrlog."'      -O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4  -Wall -W -MT utility.o -MD -MP -MF .deps/utility.Tpo -c -o utility.o utility.cpp
mv -f .deps/os_linux.Tpo .deps/os_linux.Po
mv -f .deps/utility.Tpo .deps/utility.Po
i686-tld-linux-g++  -O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4  -Wall -W  -Wl,--as-needed -Wl,--no-copy-dt-needed-entries -Wl,-z,relro -Wl,-z,combreloc  -o smartctl smartctl.o atacmdnames.o atacmds.o ataidentify.o ataprint.o dev_ata_cmd_set.o dev_interface.o knowndrives.o nvmecmds.o nvmeprint.o scsicmds.o scsiata.o scsiprint.o utility.o    os_linux.o cciss.o dev_areca.o    -lselinux 
mv -f .deps/smartd.Tpo .deps/smartd.Po
i686-tld-linux-g++  -O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4  -Wall -W  -Wl,--as-needed -Wl,--no-copy-dt-needed-entries -Wl,-z,relro -Wl,-z,combreloc  -o smartd smartd.o atacmdnames.o atacmds.o dev_ata_cmd_set.o dev_interface.o knowndrives.o nvmecmds.o scsicmds.o scsiata.o utility.o     os_linux.o cciss.o dev_areca.o  -lcap-ng   -lselinux 
make[1]: Leaving directory `/tmp/B.DINro_/BUILD/smartmontools-6.5'
+ exit 0
Executing(%install): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.DINro_/BUILD/tmp  /bin/sh -e /tmp/B.DINro_/BUILD/tmp/rpm-tmp.67949
TMP=/home/users/builder/tmp
HOME=/home/users/builder
PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin
TMPDIR=/tmp/B.DINro_/BUILD/tmp
+ umask 022
+ cd /tmp/B.DINro_/BUILD
+ /bin/rm '--interactive=never' -rf /tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder
+ /bin/mkdir -p /tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder
+ cd smartmontools-6.5
+ rm -rf /tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder
+ /usr/bin/make -j4 install 'docs_DATA=' 'examplesdir=/usr/src/examples/smartmontools-6.5' 'DESTDIR=/tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder'
make[1]: Entering directory `/tmp/B.DINro_/BUILD/smartmontools-6.5'
 /bin/mkdir -p '/tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/usr/sbin'
/bin/mkdir -p '/tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/etc'
 /bin/mkdir -p '/tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/etc/smartmontools/smartd_warning.d'
 /usr/bin/install -c -m 644 './smartd.conf' '/tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/etc/smartd.conf'
 /bin/mkdir -p '/tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/var/lib/smartmontools'
 /bin/mkdir -p '/tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/var/lib/smartmontools'
 /bin/mkdir -p '/tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/var/lib/smartmontools/drivedb'
 /usr/bin/install -c update-smart-drivedb '/tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/usr/sbin'
 /bin/mkdir -p '/tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/usr/src/examples/smartmontools-6.5'
 /bin/mkdir -p '/tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/usr/src/examples/smartmontools-6.5'
 /usr/bin/install -c -m 644 examplescripts/README '/tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/usr/src/examples/smartmontools-6.5'
 /usr/bin/install -c -m 644 drivedb.h '/tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/var/lib/smartmontools/drivedb'
/bin/mkdir -p '/tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/etc/rc.d/init.d'
/usr/bin/install -c './smartd.initd' '/tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/etc/rc.d/init.d/smartd'
 /bin/mkdir -p '/tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/usr/share/man/man5'
 /bin/mkdir -p '/tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/usr/share/man/man8'
 /usr/bin/install -c examplescripts/Example1 examplescripts/Example2 examplescripts/Example3 examplescripts/Example4 examplescripts/Example5 examplescripts/Example6 '/tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/usr/src/examples/smartmontools-6.5'
 /bin/mkdir -p '/tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/usr/share/smartmontools'
 /usr/bin/install -c smartd_warning.sh '/tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/usr/share/smartmontools'
 /usr/bin/install -c -m 644 smartd.conf.5 '/tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/usr/share/man/man5'
 /bin/mkdir -p '/tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/usr/sbin'
  /usr/bin/install -c smartctl smartd '/tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/usr/sbin'
 /usr/bin/install -c -m 644 smartctl.8 smartd.8 update-smart-drivedb.8 '/tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/usr/share/man/man8'
make[1]: Leaving directory `/tmp/B.DINro_/BUILD/smartmontools-6.5'
+ install -d /tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/etc/rc.d/init.d /tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/etc/smartmontools/run.d /tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/etc/smartmontools/smartd_warning.d /tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/etc/sysconfig /tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/usr/share/smartmontools
+ install -p /tmp/B.DINro_/smartmontools.init /tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/etc/rc.d/init.d/smartd
+ cp -p /tmp/B.DINro_/10mail /tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/etc/smartmontools/run.d/10mail
+ cp -p /tmp/B.DINro_/10powersave-notify /tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/etc/smartmontools/run.d/10powersave-notify
+ cp -p /tmp/B.DINro_/smartd-runner /tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/usr/share/smartmontools/smartd-runner
+ >/tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/etc/smartd.conf 
+ sed -e 's,^/dev/,#&,' smartd.conf
+ __spec_install_post_strip
+ set +x
Stripping 2 ELF executables...DONE
+ __spec_install_post_chrpath
+ set +x
Remove RPATH/RUNPATH from 2 executable binaries and shared object files.
+ __spec_install_post_check_so
+ set +x
Searching for shared objects with unresolved symbols... DONE
+ __spec_install_post_check_tmpfiles
+ set +x
Checking /var/run <-> tmpfiles.d completeness...
 DONE
+ __spec_install_post_compress_docs
+ set +x
Compress man pages: /usr/share/man
+ __spec_install_post_compress_modules
+ set +x
+ __spec_install_post_py_hardlink
+ set +x
Processing files: smartmontools-6.5-1
Executing(%doc): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.DINro_/BUILD/tmp  /bin/sh -e /tmp/B.DINro_/BUILD/tmp/rpm-tmp.60230
+ umask 022
+ cd /tmp/B.DINro_/BUILD
+ cd smartmontools-6.5
+ DOCDIR=/tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/usr/share/doc/smartmontools-6.5 
+ export DOCDIR
+ rm -rf /tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/usr/share/doc/smartmontools-6.5
+ /bin/mkdir -p /tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/usr/share/doc/smartmontools-6.5
+ /usr/lib/rpm/compress-doc
Compressing documentation in /tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/usr/share/doc/smartmontools-6.5...

Documentation compressed.
+ cp -pr AUTHORS ChangeLog NEWS README TODO /tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/usr/share/doc/smartmontools-6.5
+ /usr/lib/rpm/compress-doc
Compressing documentation in /tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/usr/share/doc/smartmontools-6.5...
./NEWS ./README ./AUTHORS ./ChangeLog ./TODO 
Documentation compressed.
+ exit 0
skipping /tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/usr/src/examples/smartmontools-6.5/Example1 requires detection (matches noautoreqfiles pattern #0)
skipping /tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/usr/src/examples/smartmontools-6.5/Example2 requires detection (matches noautoreqfiles pattern #0)
skipping /tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/usr/src/examples/smartmontools-6.5/Example3 requires detection (matches noautoreqfiles pattern #0)
skipping /tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/usr/src/examples/smartmontools-6.5/Example4 requires detection (matches noautoreqfiles pattern #0)
skipping /tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/usr/src/examples/smartmontools-6.5/Example5 requires detection (matches noautoreqfiles pattern #0)
skipping /tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder/usr/src/examples/smartmontools-6.5/Example6 requires detection (matches noautoreqfiles pattern #0)
Provides: config(smartmontools) = 0:6.5-1
Requires(interp): /bin/sh /bin/sh
Requires(post): /bin/sh /sbin/chkconfig
Requires(preun): /bin/sh /sbin/chkconfig
Requires: /bin/sh libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.17) libc.so.6(GLIBC_2.2) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libcap-ng.so.0 libgcc_s.so.1 libgcc_s.so.1(GCC_3.0) libgcc_s.so.1(GLIBC_2.0) libselinux.so.1 libstdc++.so.6 libstdc++.so.6(CXXABI_1.3) libstdc++.so.6(GLIBCXX_3.4) rtld(GNU_HASH)
Obsoletes: smartctl smartmontools-systemd smartsuite ucsc-smartsuite
Checking for unpackaged file(s): /usr/lib/rpm/check-files /tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder
Wrote: /tmp/B.DINro_/RPMS/smartmontools-6.5-1.i686.rpm
Executing(%clean): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.DINro_/BUILD/tmp  /bin/sh -e /tmp/B.DINro_/BUILD/tmp/rpm-tmp.11539
+ umask 022
+ cd /tmp/B.DINro_/BUILD
+ cd smartmontools-6.5
+ /bin/rm '--interactive=never' -rf /tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder
+ rm -rf /tmp/B.DINro_/BUILD/tmp/smartmontools-6.5-root-builder
ended at: Sun Aug 14 00:04:15 2016, done in 0:00:39.020467
mesg: ttyname failed: Inappropriate ioctl for device
+ chmod -R u+rwX /tmp/B.DINro_/BUILD
+ rm -rf /tmp/B.DINro_/tmp /tmp/B.DINro_/BUILD
copy rpm files to cache_dir: /spools/ready
Creating pndir index of /spools/ready/ (type=dir)...
Loading [pndir]previous /spools/ready/packages.ndir.gz...
Loading [dir]/spools/ready/...
Writing /spools/ready/packages.ndir.gz...
Begin-TLD-Builder-Info
upgrading packages
End-TLD-Builder-Info
mesg: ttyname failed: Inappropriate ioctl for device
+ rm -rf /tmp/B.DINro_
Begin-TLD-Builder-Info
Build-Time: user:35.03s sys:14.59s real:45.60s (faults io:13 non-io:522631)

Files queued for ftp:
    368340 smartmontools-6.5-1.i686.rpm
        82 smartmontools-6.5-1.src.rpm.uploadinfo

End-TLD-Builder-Info