request from: hawk checking if we should skip the build started at: Tue Aug 28 20:23:46 2018 fetching http://kraz.tld-linux.org/~builderti//srpms/93fef9e5-07a1-48e2-81e9-73ab1f51e6fd/perl-Crypt-RC6-1.0-18.src.rpm fetched 18184 bytes, 81.5 K/s installing srpm: perl-Crypt-RC6-1.0-18.src.rpm mesg: ttyname failed: Inappropriate ioctl for device + install -d /tmp/B.sHOUz2/BUILD /tmp/B.sHOUz2/RPMS + LC_ALL=en_US.UTF-8 + rpm -qp --changelog perl-Crypt-RC6-1.0-18.src.rpm * Tue Aug 28 2018 TLD Linux - For complete changelog see: http://git.tld-linux.org/?p=packages/perl-Crypt-RC6.git;a=log;h=master * Tue Aug 28 2018 Marcin Krol d716fb0 - release 18 + rpm -Uhv --nodeps --define '_topdir /tmp/B.sHOUz2' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD' perl-Crypt-RC6-1.0-18.src.rpm perl-Crypt-RC6 ################################################## + rm -f perl-Crypt-RC6-1.0-18.src.rpm mesg: ttyname failed: Inappropriate ioctl for device + install -m 700 -d /tmp/B.sHOUz2/BUILD/tmp mesg: ttyname failed: Inappropriate ioctl for device + TMPDIR=/tmp/B.sHOUz2/BUILD/tmp + exec nice -n 19 rpmbuild -bp --short-circuit --nodeps --define '_topdir /tmp/B.sHOUz2' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD' --target x86_64-tld-linux --define 'prep exit 0' /tmp/B.sHOUz2/perl-Crypt-RC6.spec Building target platforms: x86_64-tld-linux checking BuildConflict-ing packages no BuildConflicts found checking BR rpm: Building target platforms: x86_64-tld-linux no BR needed building RPM using: set -ex; : build-id: 93fef9e5-07a1-48e2-81e9-73ab1f51e6fd; TMPDIR=/tmp/B.sHOUz2/BUILD/tmp exec nice -n 19 rpmbuild -bb --define '_smp_mflags -j8' --define '_tld_builder 1' --define '_topdir /tmp/B.sHOUz2' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD' --target x86_64-tld-linux /tmp/B.sHOUz2/perl-Crypt-RC6.spec mesg: ttyname failed: Inappropriate ioctl for device + : build-id: 93fef9e5-07a1-48e2-81e9-73ab1f51e6fd + TMPDIR=/tmp/B.sHOUz2/BUILD/tmp + exec nice -n 19 rpmbuild -bb --define '_smp_mflags -j8' --define '_tld_builder 1' --define '_topdir /tmp/B.sHOUz2' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD' --target x86_64-tld-linux /tmp/B.sHOUz2/perl-Crypt-RC6.spec Building target platforms: x86_64-tld-linux Executing(%prep): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.sHOUz2/BUILD/tmp /bin/sh -e /tmp/B.sHOUz2/BUILD/tmp/rpm-tmp.98093 + umask 022 + cd /tmp/B.sHOUz2/BUILD + cd /tmp/B.sHOUz2/BUILD + rm -rf Crypt-RC6-1.0 + /usr/bin/gzip -dc /tmp/B.sHOUz2/Crypt-RC6-1.0.tar.gz + /bin/tar -xf - + STATUS=0 + '[' 0 -ne 0 ']' + cd Crypt-RC6-1.0 + /bin/id -u + '[' 10001 '=' 0 ']' + true . + /bin/chmod -Rf -Rf a+rX,u+w,g-w,o-w . + echo 'Patch #0 (perl-Crypt-RC6-endian.patch):' Patch #0 (perl-Crypt-RC6-endian.patch): + RC6.xsc chmod 644 "RC6.bs" "/usr/bin/perl5.28.0" -MExtUtils::Command::MM -e 'cp_nonempty' -- RC6.bs blib/arch/auto/Crypt/RC6/RC6.bs 644 cp RC6.pm blib/lib/Crypt/RC6.pm mv RC6.xsc RC6.c x86_64-tld-linux-gcc -c -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fPIC -march=x86-64 -DVERSION=\"1\" -DXS_VERSION=\"1\" -fPIC "-I/usr/lib64/perl5/5.28.0/x86_64-tld-linux-thread-multi/CORE" RC6.c rm -f blib/arch/auto/Crypt/RC6/RC6.so x86_64-tld-linux-gcc -shared -Wl,--no-copy-dt-needed-entries -Wl,-z,relro -Wl,-z,combreloc -L/usr/local/lib -fstack-protector-strong RC6.o -o blib/arch/auto/Crypt/RC6/RC6.so \ \ chmod 755 blib/arch/auto/Crypt/RC6/RC6.so Manifying 1 pod document + /usr/bin/make -j8 test "/usr/bin/perl5.28.0" -MExtUtils::Command::MM -e 'cp_nonempty' -- RC6.bs blib/arch/auto/Crypt/RC6/RC6.bs 644 PERL_DL_NONLAZY=1 "/usr/bin/perl5.28.0" "-Iblib/lib" "-Iblib/arch" test.pl 1..13 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 PERL_DL_NONLAZY=1 "/usr/bin/perl5.28.0" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00_load.t .. ok All tests successful. Files=1, Tests=13, 0 wallclock secs ( 0.01 usr + 0.00 sys = 0.01 CPU) Result: PASS + exit 0 Executing(%install): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.sHOUz2/BUILD/tmp /bin/sh -e /tmp/B.sHOUz2/BUILD/tmp/rpm-tmp.98093 TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.sHOUz2/BUILD/tmp + umask 022 + cd /tmp/B.sHOUz2/BUILD + /bin/rm '--interactive=never' -rf /tmp/B.sHOUz2/BUILD/tmp/perl-Crypt-RC6-1.0-root-builder + /bin/mkdir -p /tmp/B.sHOUz2/BUILD/tmp/perl-Crypt-RC6-1.0-root-builder + cd Crypt-RC6-1.0 + rm -rf /tmp/B.sHOUz2/BUILD/tmp/perl-Crypt-RC6-1.0-root-builder + /usr/bin/make -j8 install 'DESTDIR=/tmp/B.sHOUz2/BUILD/tmp/perl-Crypt-RC6-1.0-root-builder' "/usr/bin/perl5.28.0" -MExtUtils::Command::MM -e 'cp_nonempty' -- RC6.bs blib/arch/auto/Crypt/RC6/RC6.bs 644 Manifying 1 pod document Appending installation info to /tmp/B.sHOUz2/BUILD/tmp/perl-Crypt-RC6-1.0-root-builder/usr/lib64/perl5/5.28.0/x86_64-tld-linux-thread-multi/perllocal.pod Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /tmp/B.sHOUz2/BUILD/tmp/perl-Crypt-RC6-1.0-root-builder/usr/lib64/perl5/vendor_perl/5.28.0/x86_64-tld-linux-thread-multi/auto/Crypt/RC6/RC6.so Installing /tmp/B.sHOUz2/BUILD/tmp/perl-Crypt-RC6-1.0-root-builder/usr/lib64/perl5/vendor_perl/5.28.0/x86_64-tld-linux-thread-multi/Crypt/RC6.pm Installing /tmp/B.sHOUz2/BUILD/tmp/perl-Crypt-RC6-1.0-root-builder/usr/share/man/man3/Crypt::RC6.3pm + __spec_install_post_strip + set +x Stripping 1 ELF executables...DONE + __spec_install_post_chrpath + set +x Remove RPATH/RUNPATH from 1 executable binaries and shared object files. + __spec_install_post_check_so + set +x Searching for shared objects with unresolved symbols... DONE + __spec_install_post_check_tmpfiles + set +x Checking /var/run <-> tmpfiles.d completeness... DONE + __spec_install_post_compress_docs + set +x Compress man pages: /usr/share/man + __spec_install_post_compress_modules + set +x + __spec_install_post_py_hardlink + set +x + rm -f /tmp/B.sHOUz2/BUILD/tmp/perl-Crypt-RC6-1.0-root-builder/usr/lib64/perl5/5.28.0/x86_64-tld-linux-thread-multi/perllocal.pod /tmp/B.sHOUz2/BUILD/tmp/perl-Crypt-RC6-1.0-root-builder/usr/lib64/perl5/vendor_perl/5.28.0/x86_64-tld-linux-thread-multi/auto/Crypt/RC6/.packlist Processing files: perl-Crypt-RC6-1.0-18 Executing(%doc): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.sHOUz2/BUILD/tmp /bin/sh -e /tmp/B.sHOUz2/BUILD/tmp/rpm-tmp.55272 + umask 022 + cd /tmp/B.sHOUz2/BUILD + cd Crypt-RC6-1.0 + DOCDIR=/tmp/B.sHOUz2/BUILD/tmp/perl-Crypt-RC6-1.0-root-builder/usr/share/doc/perl-Crypt-RC6-1.0 + export DOCDIR + rm -rf /tmp/B.sHOUz2/BUILD/tmp/perl-Crypt-RC6-1.0-root-builder/usr/share/doc/perl-Crypt-RC6-1.0 + /bin/mkdir -p /tmp/B.sHOUz2/BUILD/tmp/perl-Crypt-RC6-1.0-root-builder/usr/share/doc/perl-Crypt-RC6-1.0 + /usr/lib/rpm/compress-doc Compressing documentation in /tmp/B.sHOUz2/BUILD/tmp/perl-Crypt-RC6-1.0-root-builder/usr/share/doc/perl-Crypt-RC6-1.0... Documentation compressed. + cp -pr CHANGES README /tmp/B.sHOUz2/BUILD/tmp/perl-Crypt-RC6-1.0-root-builder/usr/share/doc/perl-Crypt-RC6-1.0 + /usr/lib/rpm/compress-doc Compressing documentation in /tmp/B.sHOUz2/BUILD/tmp/perl-Crypt-RC6-1.0-root-builder/usr/share/doc/perl-Crypt-RC6-1.0... ./CHANGES ./README Documentation compressed. + exit 0 Provides: RC6.so()(64bit) perl(Crypt::RC6) = 1 Requires(rpmlib): rpmlib(VersionedDependencies) <= 3.0.3-1 Requires: /usr/lib64/perl5/vendor_perl/5.28.0/x86_64-tld-linux-thread-multi libc.so.6()(64bit) libc.so.6(GLIBC_2.2.5)(64bit) libc.so.6(GLIBC_2.3.4)(64bit) perl(DynaLoader) rtld(GNU_HASH) Checking for unpackaged file(s): /usr/lib/rpm/check-files /tmp/B.sHOUz2/BUILD/tmp/perl-Crypt-RC6-1.0-root-builder Wrote: /tmp/B.sHOUz2/RPMS/perl-Crypt-RC6-1.0-18.x86_64.rpm Executing(%clean): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.sHOUz2/BUILD/tmp /bin/sh -e /tmp/B.sHOUz2/BUILD/tmp/rpm-tmp.55272 + umask 022 + cd /tmp/B.sHOUz2/BUILD + cd Crypt-RC6-1.0 + /bin/rm '--interactive=never' -rf /tmp/B.sHOUz2/BUILD/tmp/perl-Crypt-RC6-1.0-root-builder + rm -rf /tmp/B.sHOUz2/BUILD/tmp/perl-Crypt-RC6-1.0-root-builder ended at: Tue Aug 28 20:23:48 2018, done in 0:00:01.103015 mesg: ttyname failed: Inappropriate ioctl for device + chmod -R u+rwX /tmp/B.sHOUz2/BUILD + rm -rf /tmp/B.sHOUz2/tmp /tmp/B.sHOUz2/BUILD copy rpm files to cache_dir: /spools/ready Creating pndir index of /spools/ready/ (type=dir)... Loading [pndir]previous /spools/ready/packages.ndir.gz... Loading [dir]/spools/ready/... 200..208 Writing /spools/ready/packages.ndir.gz... Begin-TLD-Builder-Info upgrading packages End-TLD-Builder-Info mesg: ttyname failed: Inappropriate ioctl for device + rm -rf /tmp/B.sHOUz2 Begin-TLD-Builder-Info Build-Time: user:1.40s sys:0.26s real:2.15s (faults io:0 non-io:137058) Files queued for ftp: 12646 perl-Crypt-RC6-1.0-18.x86_64.rpm 88 perl-Crypt-RC6-1.0-18.src.rpm.uploadinfo End-TLD-Builder-Info