request from: hawk checking if we should skip the build started at: Fri Jan 11 23:31:41 2019 fetching http://src.tld-linux.org/~builderti//srpms/670892c0-c55a-488a-b5eb-aeb26c56df7c/spamass-milter-0.4.0-1.src.rpm fetched 167622 bytes, 4562.9 K/s installing srpm: spamass-milter-0.4.0-1.src.rpm + install -d /tmp/B.OzvwdS/BUILD /tmp/B.OzvwdS/RPMS + LC_ALL=en_US.UTF-8 + rpm -qp --changelog spamass-milter-0.4.0-1.src.rpm * Fri Jan 11 2019 TLD Linux - For complete changelog see: http://git.tld-linux.org/?p=packages/spamass-milter.git;a=log;h=master * Fri Jan 11 2019 Marcin Krol 8d16f27 - requires spamc * Fri Jan 11 2019 Marcin Krol 5afa6aa - updated to 0.4.0, note: some options from patches are now merged but use different switches + rpm -Uhv --nodeps --define '_topdir /tmp/B.OzvwdS' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD' spamass-milter-0.4.0-1.src.rpm spamass-milter ################################################## + rm -f spamass-milter-0.4.0-1.src.rpm + install -m 700 -d /tmp/B.OzvwdS/BUILD/tmp + TMPDIR=/tmp/B.OzvwdS/BUILD/tmp + exec nice -n 19 rpmbuild -bp --short-circuit --nodeps --define '_topdir /tmp/B.OzvwdS' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD' --target x86_64-tld-linux --define 'prep exit 0' /tmp/B.OzvwdS/spamass-milter.spec Building target platforms: x86_64-tld-linux checking BuildConflict-ing packages no BuildConflicts found checking BR rpm: error: Failed build dependencies: rpm: spamassassin is needed by spamass-milter-0.4.0-1.src rpm: Building target platforms: x86_64-tld-linux updating poldek cache... local is up to date Retrieving ti::packages.ndir.md... Retrieving ti::packages.ndir.diff.toc.gz... Retrieving diff::packages.ndir.2018.10.23-09.29.25.gz... ..............................done Retrieving diff::packages.ndir.dscr.2018.10.23-09.29.25.gz... Loading [pndir]ti... Applying packages.ndir.2018.10.23-09.29.25.gz... Retrieving diff::packages.ndir.2018.12.04-12.36.39.gz... ..............................done Retrieving diff::packages.ndir.dscr.2018.12.04-12.36.39.gz... Applying packages.ndir.2018.12.04-12.36.39.gz... Retrieving diff::packages.ndir.2018.12.27-18.49.11.gz... Retrieving diff::packages.ndir.dscr.2018.12.27-18.49.11.gz... Applying packages.ndir.2018.12.27-18.49.11.gz... Writing /root/.poldek-cache/[...]/packages.ndir.gz... Retrieving ti::packages.ndir.md... Retrieving ti::packages.ndir.diff.toc.gz... ti: desynchronized index, trying to update whole index... Retrieving ti::packages.ndir.md... Retrieving ti::packages.ndir.md... Retrieving ti::packages.ndir.gz... ..............................done Retrieving ti::packages.ndir.dscr.gz... ..............................done ti is up to date Retrieving ti-test::packages.ndir.md... ti-test is up to date Retrieving ti-test::packages.ndir.md... Retrieving ti-test::packages.ndir.diff.toc.gz... ti-test: desynchronized index, trying to update whole index... Retrieving ti-test::packages.ndir.md... Retrieving ti-test::packages.ndir.md... Retrieving ti-test::packages.ndir.gz... ..............................done Retrieving ti-test::packages.ndir.dscr.gz... ..............................done ti-test is up to date checking conflicting packages in BRed packages poldek: Loading [pndir]local... poldek: Loading [pndir]ti... poldek: Loading [pndir]ti... poldek: Loading [pndir]ti-test... poldek: Loading [pndir]ti-test... poldek: 8079 packages read poldek: Removed 465 duplicate packages from available set poldek: Processing dependencies... poldek: spamassassin-3.4.1-8.x86_64 marks perl-Mail-SpamAssassin-3.4.1-8.x86_64 (cap /etc/mail/spamassassin) poldek: perl-Mail-SpamAssassin-3.4.1-8.x86_64 marks exim-4.91-11.x86_64 (cap /etc/mail) poldek: perl-Mail-SpamAssassin-3.4.1-8.x86_64 marks perl-Geo-IP-1.51-2.x86_64 (cap perl(Geo::IP)) poldek: perl-Mail-SpamAssassin-3.4.1-8.x86_64 marks perl-Net-CIDR-Lite-0.21-1.noarch (cap perl(Net::CIDR::Lite)) poldek: perl-Mail-SpamAssassin-3.4.1-8.x86_64 marks perl-NetAddr-IP-4.079-4.x86_64 (cap perl(NetAddr::IP) >= 4.000) poldek: There are 6 packages to install (5 marked by dependencies): poldek: I spamassassin-3.4.1-8.x86_64 poldek: D exim-4.91-11.x86_64 perl-Geo-IP-1.51-2.x86_64 poldek: D perl-Mail-SpamAssassin-3.4.1-8.x86_64 perl-Net-CIDR-Lite-0.21-1.noarch poldek: D perl-NetAddr-IP-4.079-4.x86_64 poldek: This operation will use 9.0MB of disk space. poldek: Need to get 2.9MB of archives (2.9MB to download). poldek: poldek: Retrieving [1/6] ti::exim-4.91-11.x86_64.rpm... poldek: ..............................done poldek: Retrieving [2/6] ti::perl-Geo-IP-1.51-2.x86_64.rpm... poldek: ..............................done poldek: Retrieving [3/6] ti::perl-NetAddr-IP-4.079-4.x86_64.rpm... poldek: ..............................done poldek: Retrieving [4/6] ti::perl-Mail-SpamAssassin-3.4.1-8.x86_64.rpm... poldek: ..............................done poldek: Retrieving [5/6] ti::spamassassin-3.4.1-8.x86_64.rpm... poldek: ..............................done poldek: Retrieving [6/6] ti::perl-Net-CIDR-Lite-0.21-1.noarch.rpm... poldek: ..............................done poldek: Executing pm-command.sh --upgrade -vh --test --root / --define _check_dirname_deps 1... poldek: Preparing... ################################################## no conflicts found checking BR rpm: error: Failed build dependencies: rpm: spamassassin is needed by spamass-milter-0.4.0-1.src rpm: Building target platforms: x86_64-tld-linux installing BR: spamassassin + poldek --noask --caplookup -Q -v --upgrade spamassassin Loading [pndir]local... Loading [pndir]ti... Loading [pndir]ti... Loading [pndir]ti-test... Loading [pndir]ti-test... 8079 packages read Removed 465 duplicate packages from available set Processing dependencies... spamassassin-3.4.1-8.x86_64 marks perl-Mail-SpamAssassin-3.4.1-8.x86_64 (cap /etc/mail/spamassassin) perl-Mail-SpamAssassin-3.4.1-8.x86_64 marks exim-4.91-11.x86_64 (cap /etc/mail) perl-Mail-SpamAssassin-3.4.1-8.x86_64 marks perl-Geo-IP-1.51-2.x86_64 (cap perl(Geo::IP)) perl-Mail-SpamAssassin-3.4.1-8.x86_64 marks perl-Net-CIDR-Lite-0.21-1.noarch (cap perl(Net::CIDR::Lite)) perl-Mail-SpamAssassin-3.4.1-8.x86_64 marks perl-NetAddr-IP-4.079-4.x86_64 (cap perl(NetAddr::IP) >= 4.000) There are 6 packages to install (5 marked by dependencies): I spamassassin-3.4.1-8.x86_64 D exim-4.91-11.x86_64 perl-Geo-IP-1.51-2.x86_64 D perl-Mail-SpamAssassin-3.4.1-8.x86_64 perl-Net-CIDR-Lite-0.21-1.noarch D perl-NetAddr-IP-4.079-4.x86_64 This operation will use 9.0MB of disk space. Need to get 2.9MB of archives. Executing pm-command.sh --upgrade -vh --root / --define _check_dirname_deps 1... Preparing... ################################################## perl-NetAddr-IP ################################################## perl-Geo-IP ################################################## Adding group exim GID=79. Adding user exim UID=79. exim ################################################## Run "/sbin/service exim start" to start exim daemon. 20 entries written perl-Net-CIDR-Lite ################################################## perl-Mail-SpamAssassin ################################################## spamassassin ################################################## building RPM using: set -ex; : build-id: 670892c0-c55a-488a-b5eb-aeb26c56df7c; TMPDIR=/tmp/B.OzvwdS/BUILD/tmp exec nice -n 19 rpmbuild -bb --define '_smp_mflags -j4' --define '_tld_builder 1' --define '_topdir /tmp/B.OzvwdS' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD' --target x86_64-tld-linux /tmp/B.OzvwdS/spamass-milter.spec + : build-id: 670892c0-c55a-488a-b5eb-aeb26c56df7c + TMPDIR=/tmp/B.OzvwdS/BUILD/tmp + exec nice -n 19 rpmbuild -bb --define '_smp_mflags -j4' --define '_tld_builder 1' --define '_topdir /tmp/B.OzvwdS' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD' --target x86_64-tld-linux /tmp/B.OzvwdS/spamass-milter.spec Building target platforms: x86_64-tld-linux Executing(%prep): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.OzvwdS/BUILD/tmp /bin/sh -e /tmp/B.OzvwdS/BUILD/tmp/rpm-tmp.29289 + umask 022 + cd /tmp/B.OzvwdS/BUILD + cd /tmp/B.OzvwdS/BUILD + rm -rf spamass-milter-0.4.0 + /usr/bin/gzip -dc /tmp/B.OzvwdS/spamass-milter-0.4.0.tar.gz + /bin/tar -xf - + STATUS=0 + '[' 0 -ne 0 ']' + cd spamass-milter-0.4.0 + /bin/id -u + '[' 10001 '=' 0 ']' + true . + /bin/chmod -Rf -Rf a+rX,u+w,g-w,o-w . + echo 'Patch #0 (spamass-milter-rcvd.patch):' Patch #0 (spamass-milter-rcvd.patch): + tmpfiles.d completeness... DONE + __spec_install_post_compress_docs + set +x Compress man pages: /usr/share/man + __spec_install_post_compress_modules + set +x + __spec_install_post_py_hardlink + set +x Processing files: spamass-milter-0.4.0-1 Executing(%doc): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.OzvwdS/BUILD/tmp /bin/sh -e /tmp/B.OzvwdS/BUILD/tmp/rpm-tmp.12733 + umask 022 + cd /tmp/B.OzvwdS/BUILD + cd spamass-milter-0.4.0 + DOCDIR=/tmp/B.OzvwdS/BUILD/tmp/spamass-milter-0.4.0-root-builder/usr/share/doc/spamass-milter-0.4.0 + export DOCDIR + rm -rf /tmp/B.OzvwdS/BUILD/tmp/spamass-milter-0.4.0-root-builder/usr/share/doc/spamass-milter-0.4.0 + /bin/mkdir -p /tmp/B.OzvwdS/BUILD/tmp/spamass-milter-0.4.0-root-builder/usr/share/doc/spamass-milter-0.4.0 + /usr/lib/rpm/compress-doc Compressing documentation in /tmp/B.OzvwdS/BUILD/tmp/spamass-milter-0.4.0-root-builder/usr/share/doc/spamass-milter-0.4.0... Documentation compressed. + cp -pr AUTHORS ChangeLog NEWS README /tmp/B.OzvwdS/BUILD/tmp/spamass-milter-0.4.0-root-builder/usr/share/doc/spamass-milter-0.4.0 + /usr/lib/rpm/compress-doc Compressing documentation in /tmp/B.OzvwdS/BUILD/tmp/spamass-milter-0.4.0-root-builder/usr/share/doc/spamass-milter-0.4.0... ./README ./ChangeLog ./NEWS ./AUTHORS Documentation compressed. + exit 0 Provides: config(spamass-milter) = 0:0.4.0-1 Requires(interp): /bin/sh /bin/sh Requires(post): /bin/sh /sbin/chkconfig Requires(preun): /bin/sh /sbin/chkconfig Requires: /bin/sh libc.so.6()(64bit) libc.so.6(GLIBC_2.14)(64bit) libc.so.6(GLIBC_2.15)(64bit) libc.so.6(GLIBC_2.2.5)(64bit) libc.so.6(GLIBC_2.3)(64bit) libc.so.6(GLIBC_2.3.4)(64bit) libc.so.6(GLIBC_2.4)(64bit) libgcc_s.so.1()(64bit) libgcc_s.so.1(GCC_3.0)(64bit) libpthread.so.0()(64bit) libpthread.so.0(GLIBC_2.2.5)(64bit) libstdc++.so.6()(64bit) libstdc++.so.6(CXXABI_1.3)(64bit) libstdc++.so.6(CXXABI_1.3.9)(64bit) libstdc++.so.6(GLIBCXX_3.4)(64bit) libstdc++.so.6(GLIBCXX_3.4.15)(64bit) libstdc++.so.6(GLIBCXX_3.4.21)(64bit) rtld(GNU_HASH) Checking for unpackaged file(s): /usr/lib/rpm/check-files /tmp/B.OzvwdS/BUILD/tmp/spamass-milter-0.4.0-root-builder Wrote: /tmp/B.OzvwdS/RPMS/spamass-milter-0.4.0-1.x86_64.rpm Executing(%clean): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.OzvwdS/BUILD/tmp /bin/sh -e /tmp/B.OzvwdS/BUILD/tmp/rpm-tmp.12733 + umask 022 + cd /tmp/B.OzvwdS/BUILD + cd spamass-milter-0.4.0 + /bin/rm '--interactive=never' -rf /tmp/B.OzvwdS/BUILD/tmp/spamass-milter-0.4.0-root-builder + rm -rf /tmp/B.OzvwdS/BUILD/tmp/spamass-milter-0.4.0-root-builder ended at: Fri Jan 11 23:32:08 2019, done in 0:00:07.511136 + chmod -R u+rwX /tmp/B.OzvwdS/BUILD + rm -rf /tmp/B.OzvwdS/tmp /tmp/B.OzvwdS/BUILD copy rpm files to cache_dir: /spools/ready Creating pndir index of /spools/ready/ (type=dir)... Loading [pndir]previous /spools/ready/packages.ndir.gz... Loading [dir]/spools/ready/... 200..238 Writing /spools/ready/packages.ndir.gz... Begin-TLD-Builder-Info upgrading packages End-TLD-Builder-Info + rm -rf /tmp/B.OzvwdS Begin-TLD-Builder-Info Build-Time: user:4.63s sys:0.87s real:26.95s (faults io:25 non-io:601076) Files queued for ftp: 60013 spamass-milter-0.4.0-1.x86_64.rpm 90 spamass-milter-0.4.0-1.src.rpm.uploadinfo End-TLD-Builder-Info