request from: hawk
checking if we should skip the build
started at: Mon Aug  3 21:17:52 2015
fetching http://kraz.tld-linux.org/~buildertidev//srpms/41e0df5d-6625-40a5-afbd-956d1d2e91bf/dracut-043-1.src.rpm
fetched 286085 bytes, 373.1 K/s
installing srpm: dracut-043-1.src.rpm
mesg: ttyname failed: Inappropriate ioctl for device
mesg: ttyname failed: Inappropriate ioctl for device
mesg: ttyname failed: Inappropriate ioctl for device
Building target platforms: i686-pld-linux
checking BuildConflict-ing packages
no BuildConflicts found
checking BR
no BR needed
building RPM using: echo build-id: 41e0df5d-6625-40a5-afbd-956d1d2e91bf; cd rpm/SPECS; TMPDIR=/tmp/B.116a3b exec nice -n 19 rpmbuild -bb --define '_smp_mflags -j4'  --target i686-pld-linux   dracut.spec
mesg: ttyname failed: Inappropriate ioctl for device
build-id: 41e0df5d-6625-40a5-afbd-956d1d2e91bf
Building target platforms: i686-pld-linux
Executing(%prep): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.116a3b  /bin/sh -e /tmp/B.116a3b/rpm-tmp.74217
+ umask 022
+ cd /home/users/builder/rpm/BUILD
+ cd /home/users/builder/rpm/BUILD
+ rm -rf dracut-043
+ /usr/bin/xz -dc /home/users/builder/rpm/SOURCES/dracut-043.tar.xz
+ tar -xf -
+ STATUS=0 
+ '[' 0 -ne 0 ']'
+ cd dracut-043
+ /bin/id -u
+ '[' 10001 '=' 0 ']'
+ true .
+ /bin/chmod -Rf -Rf a+rX,u+w,g-w,o-w .
+ echo 'Patch #1 (plymouth-libexec.patch):'
Patch #1 (plymouth-libexec.patch):
+ </home/users/builder/rpm/SOURCES/plymouth-libexec.patch 
+ patch -p1 -s
+ echo 'Patch #2 (os-release.patch):'
Patch #2 (os-release.patch):
+ </home/users/builder/rpm/SOURCES/os-release.patch 
+ patch -p1 -s
+ echo 'Patch #3 (plymouth-logo.patch):'
Patch #3 (plymouth-logo.patch):
+ </home/users/builder/rpm/SOURCES/plymouth-logo.patch 
+ patch -p1 -s
+ echo 'Patch #4 (arch-libdir.patch):'
Patch #4 (arch-libdir.patch):
+ </home/users/builder/rpm/SOURCES/arch-libdir.patch 
+ patch -p1 -s
+ echo 'Patch #6 (prelink-libs.patch):'
Patch #6 (prelink-libs.patch):
+ </home/users/builder/rpm/SOURCES/prelink-libs.patch 
+ patch -p1 -s
+ echo 'Patch #7 (config.patch):'
Patch #7 (config.patch):
+ </home/users/builder/rpm/SOURCES/config.patch 
+ patch -p1 -s
+ echo 'Patch #8 (xz_compressor.patch):'
Patch #8 (xz_compressor.patch):
+ </home/users/builder/rpm/SOURCES/xz_compressor.patch 
+ patch -p1 -s
+ echo 'Patch #9 (proc_sys_remount.patch):'
Patch #9 (proc_sys_remount.patch):
+ </home/users/builder/rpm/SOURCES/proc_sys_remount.patch 
+ patch -p1 -s
+ echo 'Patch #10 (misc_fixes.patch):'
Patch #10 (misc_fixes.patch):
+ </home/users/builder/rpm/SOURCES/misc_fixes.patch 
+ patch -p1 -s
+ /bin/sed -i -e s,@lib@,lib,g modules.d/50plymouth/module-setup.sh
+ /bin/sed -i -e s,@lib@,lib,g modules.d/95resume/module-setup.sh
+ find modules.d -name '*.orig'
+ xargs -r /bin/rm '--interactive=never'
+ exit 0
Executing(%build): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.116a3b  /bin/sh -e /tmp/B.116a3b/rpm-tmp.74217
TMP=/home/users/builder/tmp
HOME=/home/users/builder
PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin
TMPDIR=/tmp/B.116a3b
+ umask 022
+ cd /home/users/builder/rpm/BUILD
+ cd dracut-043
+ ./configure '--sysconfdir=/etc'
+ /usr/bin/make -j4 all doc 'CC=i686-tld-linux-gcc' 'CFLAGS=-O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4 '
i686-tld-linux-gcc -O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4    -c -o install/dracut-install.o install/dracut-install.c
i686-tld-linux-gcc -O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4    -c -o install/hashmap.o install/hashmap.c
i686-tld-linux-gcc -O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4    -c -o install/log.o install/log.c
i686-tld-linux-gcc -O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4    -c -o install/strv.o install/strv.c
i686-tld-linux-gcc -O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4    -c -o install/util.o install/util.c
i686-tld-linux-gcc -O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4    -c -o skipcpio/skipcpio.o skipcpio/skipcpio.c
make: Nothing to be done for `doc'.
i686-tld-linux-gcc   skipcpio/skipcpio.o   -o skipcpio/skipcpio
i686-tld-linux-gcc   install/dracut-install.o install/hashmap.o install/log.o install/strv.o install/util.o   -o install/dracut-install
ln -fs install/dracut-install dracut-install
+ exit 0
Executing(%install): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.116a3b  /bin/sh -e /tmp/B.116a3b/rpm-tmp.77001
TMP=/home/users/builder/tmp
HOME=/home/users/builder
PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin
TMPDIR=/tmp/B.116a3b
+ umask 022
+ cd /home/users/builder/rpm/BUILD
+ /bin/rm '--interactive=never' -rf /tmp/B.116a3b/dracut-043-root-builder
+ /bin/mkdir -p /tmp/B.116a3b/dracut-043-root-builder
+ cd dracut-043
+ rm -rf /tmp/B.116a3b/dracut-043-root-builder
+ install -d /tmp/B.116a3b/dracut-043-root-builder/boot/dracut /tmp/B.116a3b/dracut-043-root-builder/etc/logrotate.d /tmp/B.116a3b/dracut-043-root-builder/sbin /tmp/B.116a3b/dracut-043-root-builder/var/log /tmp/B.116a3b/dracut-043-root-builder/var/lib/dracut/overlay /tmp/B.116a3b/dracut-043-root-builder/var/lib/initramfs
+ /usr/bin/make -j4 install 'DESTDIR=/tmp/B.116a3b/dracut-043-root-builder'
mkdir -p /tmp/B.116a3b/dracut-043-root-builder/usr/lib/dracut
mkdir -p /tmp/B.116a3b/dracut-043-root-builder/usr/bin
mkdir -p /tmp/B.116a3b/dracut-043-root-builder/etc
mkdir -p /tmp/B.116a3b/dracut-043-root-builder/usr/lib/dracut/modules.d
mkdir -p /tmp/B.116a3b/dracut-043-root-builder/usr/share/man/man1 /tmp/B.116a3b/dracut-043-root-builder/usr/share/man/man5 /tmp/B.116a3b/dracut-043-root-builder/usr/share/man/man7 /tmp/B.116a3b/dracut-043-root-builder/usr/share/man/man8
install -m 0755 dracut.sh /tmp/B.116a3b/dracut-043-root-builder/usr/bin/dracut
install -m 0755 dracut-catimages.sh /tmp/B.116a3b/dracut-043-root-builder/usr/bin/dracut-catimages
install -m 0755 mkinitrd-dracut.sh /tmp/B.116a3b/dracut-043-root-builder/usr/bin/mkinitrd
install -m 0755 lsinitrd.sh /tmp/B.116a3b/dracut-043-root-builder/usr/bin/lsinitrd
install -m 0644 dracut.conf /tmp/B.116a3b/dracut-043-root-builder/etc/dracut.conf
mkdir -p /tmp/B.116a3b/dracut-043-root-builder/etc/dracut.conf.d
mkdir -p /tmp/B.116a3b/dracut-043-root-builder/usr/lib/dracut/dracut.conf.d
install -m 0755 dracut-functions.sh /tmp/B.116a3b/dracut-043-root-builder/usr/lib/dracut/dracut-functions.sh
install -m 0755 dracut-version.sh /tmp/B.116a3b/dracut-043-root-builder/usr/lib/dracut/dracut-version.sh
ln -fs dracut-functions.sh /tmp/B.116a3b/dracut-043-root-builder/usr/lib/dracut/dracut-functions
install -m 0755 dracut-logger.sh /tmp/B.116a3b/dracut-043-root-builder/usr/lib/dracut/dracut-logger.sh
install -m 0755 dracut-initramfs-restore.sh /tmp/B.116a3b/dracut-043-root-builder/usr/lib/dracut/dracut-initramfs-restore
cp -arx modules.d /tmp/B.116a3b/dracut-043-root-builder/usr/lib/dracut
for i in lsinitrd.1; do install -m 0644 $i /tmp/B.116a3b/dracut-043-root-builder/usr/share/man/man1/${i##*/}; done
for i in dracut.conf.5; do install -m 0644 $i /tmp/B.116a3b/dracut-043-root-builder/usr/share/man/man5/${i##*/}; done
for i in dracut.cmdline.7 dracut.bootup.7 dracut.modules.7; do install -m 0644 $i /tmp/B.116a3b/dracut-043-root-builder/usr/share/man/man7/${i##*/}; done
for i in dracut.8 dracut-catimages.8 mkinitrd.8 mkinitrd-suse.8 modules.d/98dracut-systemd/dracut-cmdline.service.8 modules.d/98dracut-systemd/dracut-initqueue.service.8 modules.d/98dracut-systemd/dracut-mount.service.8 modules.d/98dracut-systemd/dracut-shutdown.service.8 modules.d/98dracut-systemd/dracut-pre-mount.service.8 modules.d/98dracut-systemd/dracut-pre-pivot.service.8 modules.d/98dracut-systemd/dracut-pre-trigger.service.8 modules.d/98dracut-systemd/dracut-pre-udev.service.8; do install -m 0644 $i /tmp/B.116a3b/dracut-043-root-builder/usr/share/man/man8/${i##*/}; done
ln -fs dracut.cmdline.7 /tmp/B.116a3b/dracut-043-root-builder/usr/share/man/man7/dracut.kernel.7
if [ -n "" ]; then \
	mkdir -p /tmp/B.116a3b/dracut-043-root-builder; \
	ln -srf /tmp/B.116a3b/dracut-043-root-builder/usr/lib/dracut/modules.d/98dracut-systemd/dracut-shutdown.service /tmp/B.116a3b/dracut-043-root-builder/dracut-shutdown.service; \
	mkdir -p /tmp/B.116a3b/dracut-043-root-builder/sysinit.target.wants; \
	ln -s ../dracut-shutdown.service \
	/tmp/B.116a3b/dracut-043-root-builder/sysinit.target.wants/dracut-shutdown.service; \
	mkdir -p /tmp/B.116a3b/dracut-043-root-builder/initrd.target.wants; \
	for i in \
	    dracut-cmdline.service \
	    dracut-initqueue.service \
	    dracut-mount.service \
	    dracut-pre-mount.service \
	    dracut-pre-pivot.service \
	    dracut-pre-trigger.service \
	    dracut-pre-udev.service \
	    ; do \
		ln -srf /tmp/B.116a3b/dracut-043-root-builder/usr/lib/dracut/modules.d/98dracut-systemd/$i /tmp/B.116a3b/dracut-043-root-builder; \
		ln -s ../$i \
		/tmp/B.116a3b/dracut-043-root-builder/initrd.target.wants/$i; \
	done \
fi
if [ -f install/dracut-install ]; then \
	install -m 0755 install/dracut-install /tmp/B.116a3b/dracut-043-root-builder/usr/lib/dracut/dracut-install; \
fi
if [ -f skipcpio/skipcpio ]; then \
	install -m 0755 skipcpio/skipcpio /tmp/B.116a3b/dracut-043-root-builder/usr/lib/dracut/skipcpio; \
fi
mkdir -p /tmp/B.116a3b/dracut-043-root-builder/usr/lib/kernel/install.d
install -m 0755 50-dracut.install /tmp/B.116a3b/dracut-043-root-builder/usr/lib/kernel/install.d/50-dracut.install
install -m 0755 51-dracut-rescue.install /tmp/B.116a3b/dracut-043-root-builder/usr/lib/kernel/install.d/51-dracut-rescue.install
mkdir -p /tmp/B.116a3b/dracut-043-root-builder/usr/share/bash-completion/completions
install -m 0644 dracut-bash-completion.sh /tmp/B.116a3b/dracut-043-root-builder/usr/share/bash-completion/completions/dracut
install -m 0644 lsinitrd-bash-completion.sh /tmp/B.116a3b/dracut-043-root-builder/usr/share/bash-completion/completions/lsinitrd
mkdir -p /tmp/B.116a3b/dracut-043-root-builder/usr/share/pkgconfig
install -m 0644 dracut.pc /tmp/B.116a3b/dracut-043-root-builder/usr/share/pkgconfig/dracut.pc
+ install -p /home/users/builder/rpm/SOURCES/tld.conf /tmp/B.116a3b/dracut-043-root-builder/etc/dracut.conf.d/01-dist.conf
+ install -p dracut.conf.d/fips.conf.example /tmp/B.116a3b/dracut-043-root-builder/etc/dracut.conf.d/40-fips.conf
+ install -p dracut.logrotate /tmp/B.116a3b/dracut-043-root-builder/etc/logrotate.d/dracut_log
+ >/tmp/B.116a3b/dracut-043-root-builder//usr/lib/dracut/dracut-version.sh 
+ echo 'DRACUT_VERSION=043-1'
+ ln -s /usr/bin/dracut /tmp/B.116a3b/dracut-043-root-builder/sbin/dracut
+ /bin/rm '--interactive=never' -r /tmp/B.116a3b/dracut-043-root-builder/usr/lib/dracut/modules.d/50gensplash
+ /bin/rm '--interactive=never' /tmp/B.116a3b/dracut-043-root-builder/usr/share/man/man8/mkinitrd-suse.8
+ /bin/rm '--interactive=never' -r /tmp/B.116a3b/dracut-043-root-builder/usr/lib/dracut/modules.d/00systemd /tmp/B.116a3b/dracut-043-root-builder/usr/lib/dracut/modules.d/00systemd-bootchart /tmp/B.116a3b/dracut-043-root-builder/usr/lib/dracut/modules.d/01systemd-initrd /tmp/B.116a3b/dracut-043-root-builder/usr/lib/dracut/modules.d/02systemd-networkd /tmp/B.116a3b/dracut-043-root-builder/usr/lib/dracut/modules.d/98dracut-systemd
+ /bin/rm '--interactive=never' /tmp/B.116a3b/dracut-043-root-builder/usr/lib/dracut/modules.d/90multipath/multipathd.service
+ __spec_install_post_strip
+ set +x
Stripping 2 ELF executables...DONE
+ __spec_install_post_chrpath
+ set +x
Remove RPATH/RUNPATH from 2 executable binaries and shared object files.
+ __spec_install_post_check_so
+ set +x
Searching for shared objects with unresolved symbols... DONE
+ __spec_install_post_check_tmpfiles
+ set +x
Checking /var/run <-> tmpfiles.d completeness...
 DONE
+ __spec_install_post_compress_docs
+ set +x
Compress man pages: /usr/share/man
Converted /usr/share/man/man7/dracut.kernel.7 from symlink to man link: man7/dracut.cmdline.7
+ __spec_install_post_compress_modules
+ set +x
+ __spec_install_post_py_hardlink
+ set +x
Processing files: dracut-043-1
Executing(%doc): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.116a3b  /bin/sh -e /tmp/B.116a3b/rpm-tmp.84255
+ umask 022
+ cd /home/users/builder/rpm/BUILD
+ cd dracut-043
+ DOCDIR=/tmp/B.116a3b/dracut-043-root-builder/usr/share/doc/dracut-043 
+ export DOCDIR
+ rm -rf /tmp/B.116a3b/dracut-043-root-builder/usr/share/doc/dracut-043
+ /bin/mkdir -p /tmp/B.116a3b/dracut-043-root-builder/usr/share/doc/dracut-043
+ /usr/lib/rpm/compress-doc
Compressing documentation in /tmp/B.116a3b/dracut-043-root-builder/usr/share/doc/dracut-043...

Documentation compressed.
+ cp -pr AUTHORS HACKING NEWS README README.generic README.kernel README.modules README.testsuite TODO dracut.html dracut.png dracut.svg /tmp/B.116a3b/dracut-043-root-builder/usr/share/doc/dracut-043
+ /usr/lib/rpm/compress-doc
Compressing documentation in /tmp/B.116a3b/dracut-043-root-builder/usr/share/doc/dracut-043...
./README.generic ./NEWS ./README ./AUTHORS ./README.testsuite ./TODO ./README.modules ./dracut.svg ./HACKING ./README.kernel 
Documentation compressed.
+ exit 0
Provides: config(dracut) = 0:043-1 pkgconfig(dracut) = 043
Requires(rpmlib): rpmlib(VersionedDependencies) <= 3.0.3-1
Requires: /bin/bash /bin/sh libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.2) libc.so.6(GLIBC_2.3) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libc.so.6(GLIBC_2.7) libc.so.6(GLIBC_2.8) rtld(GNU_HASH)
Conflicts: kmod < 6
Processing files: dracut-network-043-1
Requires: /bin/bash /bin/sh
Processing files: dracut-fips-043-1
Provides: config(dracut-fips) = 0:043-1
Requires: /bin/bash /bin/sh
Processing files: dracut-fips-aesni-043-1
Requires: /bin/bash
Processing files: dracut-caps-043-1
Requires: /bin/bash
Processing files: dracut-tools-043-1
Requires: /bin/bash
Processing files: bash-completion-dracut-043-1
Checking for unpackaged file(s): /usr/lib/rpm/check-files /tmp/B.116a3b/dracut-043-root-builder
warning: Installed (but unpackaged) file(s) found:
   /usr/lib/kernel/install.d/50-dracut.install
   /usr/lib/kernel/install.d/51-dracut-rescue.install
Wrote: /home/users/builder/rpm/RPMS/dracut-043-1.i686.rpm
Wrote: /home/users/builder/rpm/RPMS/dracut-network-043-1.i686.rpm
Wrote: /home/users/builder/rpm/RPMS/dracut-fips-043-1.i686.rpm
Wrote: /home/users/builder/rpm/RPMS/dracut-fips-aesni-043-1.i686.rpm
Wrote: /home/users/builder/rpm/RPMS/dracut-caps-043-1.i686.rpm
Wrote: /home/users/builder/rpm/RPMS/dracut-tools-043-1.i686.rpm
Wrote: /home/users/builder/rpm/RPMS/bash-completion-dracut-043-1.i686.rpm
Executing(%clean): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.116a3b  /bin/sh -e /tmp/B.116a3b/rpm-tmp.5853
+ umask 022
+ cd /home/users/builder/rpm/BUILD
+ cd dracut-043
+ /bin/rm '--interactive=never' -rf /tmp/B.116a3b/dracut-043-root-builder
+ rm -rf /tmp/B.116a3b/dracut-043-root-builder
ended at: Mon Aug  3 21:18:09 2015, done in 01days 00h 00m 13s
mesg: ttyname failed: Inappropriate ioctl for device
copy rpm files to cache_dir: /spools/ready
Creating pndir index of /spools/ready/ (type=dir)...
Loading [pndir]previous /spools/ready/packages.ndir.gz...
Loading [dir]/spools/ready/...
200..400..547
Writing /spools/ready/packages.ndir.gz...
Begin-PLD-Builder-Info
upgrading packages
End-PLD-Builder-Info
Begin-PLD-Builder-Info
Build-Time: user:8.37s sys:10.50s real:21.44s (faults io:247 non-io:728621)

Files queued for ftp:
    254061 dracut-043-1.i686.rpm
     41548 dracut-network-043-1.i686.rpm
      6440 dracut-fips-043-1.i686.rpm
      4127 dracut-fips-aesni-043-1.i686.rpm
      5330 dracut-caps-043-1.i686.rpm
      6385 dracut-tools-043-1.i686.rpm
      4824 bash-completion-dracut-043-1.i686.rpm
       311 dracut-043-1.src.rpm.uploadinfo

warning: Installed (but unpackaged) file(s) found:
   /usr/lib/kernel/install.d/50-dracut.install
   /usr/lib/kernel/install.d/51-dracut-rescue.install
End-PLD-Builder-Info