request from: hawk checking if we should skip the build started at: Thu Feb 12 17:51:22 2015 fetching http://kraz.tld-linux.org/~buildertidev//srpms/bb0f20f1-7ea9-49c5-a740-0cdc8cbf0111/perl-IO-Tty-1.10-4.src.rpm fetched 28637 bytes, 101.9 K/s installing srpm: perl-IO-Tty-1.10-4.src.rpm mesg: ttyname failed: Inappropriate ioctl for device mesg: ttyname failed: Inappropriate ioctl for device mesg: ttyname failed: Inappropriate ioctl for device Building target platforms: i686-pld-linux checking BuildConflict-ing packages no BuildConflicts found checking BR no BR needed building RPM using: echo build-id: bb0f20f1-7ea9-49c5-a740-0cdc8cbf0111; cd rpm/SPECS; TMPDIR=/tmp/B.858821 exec nice -n 19 rpmbuild -bb --define '_smp_mflags -j4' --target i686-pld-linux perl-IO-Tty.spec mesg: ttyname failed: Inappropriate ioctl for device build-id: bb0f20f1-7ea9-49c5-a740-0cdc8cbf0111 Building target platforms: i686-pld-linux Executing(%prep): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.858821 /bin/sh -e /tmp/B.858821/rpm-tmp.24459 + umask 022 + cd /home/users/builder/rpm/BUILD + cd /home/users/builder/rpm/BUILD + rm -rf IO-Tty-1.10 + /usr/bin/gzip -dc /home/users/builder/rpm/SOURCES/IO-Tty-1.10.tar.gz + tar -xf - + STATUS=0 + '[' 0 -ne 0 ']' + cd IO-Tty-1.10 + /bin/id -u + '[' 10001 '=' 0 ']' + true . + /bin/chmod -Rf -Rf a+rX,u+w,g-w,o-w . + exit 0 Executing(%build): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.858821 /bin/sh -e /tmp/B.858821/rpm-tmp.24459 TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.858821 + umask 022 + cd /home/users/builder/rpm/BUILD + cd IO-Tty-1.10 + /usr/bin/perl Makefile.PL 'INSTALLDIRS=vendor' Now let's see what we can find out about your system (logfiles of failing tests are available in the conf/ dir)... Looking for _getpty()...... not found. Looking for getpt()........ FOUND. Looking for grantpt()...... FOUND. Looking for openpty()...... FOUND. Looking for posix_openpt(). FOUND. Looking for ptsname()...... FOUND. Looking for ptsname_r().... FOUND. Looking for sigaction().... FOUND. Looking for strlcpy()...... not found. Looking for ttyname()...... FOUND. Looking for unlockpt()..... FOUND. Looking for libutil.h...... not found. Looking for pty.h.......... FOUND. Looking for sys/pty.h...... not found. Looking for sys/ptyio.h.... not found. Looking for sys/stropts.h.. FOUND. Looking for termio.h....... FOUND. Looking for termios.h...... FOUND. Looking for util.h......... not found. Checking which symbols compile OK... (sorry for the tedious check, but some systems have not too clean header files, to say the least; '+' means OK, '-' means not defined and '*' has compile problems...) +B0 +B110 +B115200 +B1200 +B134 +B150 -B153600 +B1800 +B19200 +B200 +B230400 +B2400 +B300 -B307200 +B38400 +B460800 +B4800 +B50 +B57600 +B600 +B75 -B76800 +B9600 +BRKINT +BS0 +BS1 +BSDLY +CBAUD -CBAUDEXT +CBRK -CCTS_OFLOW -CDEL +CDSUSP +CEOF +CEOL -CEOL2 +CEOT +CERASE -CESC +CFLUSH +CIBAUD -CIBAUDEXT +CINTR +CKILL +CLNEXT +CLOCAL -CNSWTCH -CNUL +CQUIT +CR0 +CR1 +CR2 +CR3 +CRDLY +CREAD +CRPRNT +CRTSCTS -CRTSXOFF -CRTS_IFLOW +CS5 +CS6 +CS7 +CS8 +CSIZE +CSTART +CSTOP +CSTOPB +CSUSP -CSWTCH +CWERASE -DEFECHO -DIOC -DIOCGETP -DIOCSETP -DOSMODE +ECHO +ECHOCTL +ECHOE +ECHOK +ECHOKE +ECHONL +ECHOPRT +EXTA +EXTB +FF0 +FF1 +FFDLY -FIORDCHK +FLUSHO +HUPCL +ICANON +ICRNL +IEXTEN +IGNBRK +IGNCR +IGNPAR +IMAXBEL +INLCR +INPCK +ISIG +ISTRIP +IUCLC +IXANY +IXOFF +IXON -KBENABLED -LDCHG -LDCLOSE -LDDMAP -LDEMAP -LDGETT -LDGMAP -LDIOC -LDNMAP -LDOPEN -LDSETT -LDSMAP -LOBLK +NCCS +NL0 +NL1 +NLDLY +NOFLSH +OCRNL +OFDEL +OFILL +OLCUC +ONLCR +ONLRET +ONOCR +OPOST -PAGEOUT +PARENB -PAREXT +PARMRK +PARODD +PENDIN -RCV1EN -RTS_TOG +TAB0 +TAB1 +TAB2 +TAB3 +TABDLY -TCDSET +TCFLSH +TCGETA +TCGETS +TCIFLUSH +TCIOFF +TCIOFLUSH +TCION +TCOFLUSH +TCOOFF +TCOON +TCSADRAIN +TCSAFLUSH +TCSANOW +TCSBRK +TCSETA +TCSETAF +TCSETAW -TCSETCTTY +TCSETS +TCSETSF +TCSETSW +TCXONC -TERM_D40 -TERM_D42 -TERM_H45 -TERM_NONE -TERM_TEC -TERM_TEX -TERM_V10 -TERM_V61 +TIOCCBRK -TIOCCDTR +TIOCCONS +TIOCEXCL -TIOCFLUSH -TIOCGETC +TIOCGETD -TIOCGETP -TIOCGLTC +TIOCGPGRP +TIOCGSID +TIOCGSOFTCAR +TIOCGWINSZ -TIOCHPCL -TIOCKBOF -TIOCKBON -TIOCLBIC -TIOCLBIS -TIOCLGET -TIOCLSET +TIOCMBIC +TIOCMBIS +TIOCMGET +TIOCMSET +TIOCM_CAR +TIOCM_CD +TIOCM_CTS +TIOCM_DSR +TIOCM_DTR +TIOCM_LE +TIOCM_RI +TIOCM_RNG +TIOCM_RTS +TIOCM_SR +TIOCM_ST +TIOCNOTTY +TIOCNXCL +TIOCOUTQ -TIOCREMOTE +TIOCSBRK +TIOCSCTTY -TIOCSDTR -TIOCSETC +TIOCSETD -TIOCSETN -TIOCSETP -TIOCSIGNAL -TIOCSLTC +TIOCSPGRP -TIOCSSID +TIOCSSOFTCAR -TIOCSTART +TIOCSTI -TIOCSTOP +TIOCSWINSZ -TM_ANL -TM_CECHO -TM_CINVIS -TM_LCF -TM_NONE -TM_SET -TM_SNL +TOSTOP -VCEOF -VCEOL +VDISCARD -VDSUSP +VEOF +VEOL +VEOL2 +VERASE +VINTR +VKILL +VLNEXT +VMIN +VQUIT +VREPRINT +VSTART +VSTOP +VSUSP -VSWTCH +VT0 +VT1 +VTDLY +VTIME +VWERASE -WRAP +XCASE -XCLUDE -XMT1EN +XTABS >>> Configuration looks good! <<< Writing IO::Tty::Constant.pm... DEFINE = -DHAVE_DEV_PTMX -DHAVE_GETPT -DHAVE_GRANTPT -DHAVE_OPENPTY -DHAVE_POSIX_OPENPT -DHAVE_PTSNAME -DHAVE_PTSNAME_R -DHAVE_PTY_H -DHAVE_SIGACTION -DHAVE_SYS_STROPTS_H -DHAVE_TERMIOS_H -DHAVE_TERMIO_H -DHAVE_TTYNAME -DHAVE_UNLOCKPT Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for IO::Tty Writing MYMETA.yml and MYMETA.json + /usr/bin/make -j4 'CC=i686-tld-linux-gcc' 'OPTIMIZE=-O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4 ' /usr/bin/perl5.20.1 /usr/share/perl5/5.20.1/ExtUtils/xsubpp -typemap /usr/share/perl5/5.20.1/ExtUtils/typemap Tty.xs > Tty.xsc && mv Tty.xsc Tty.c Running Mkbootstrap for IO::Tty () chmod 644 Tty.bs cp Pty.pm blib/lib/IO/Pty.pm cp Tty.pm blib/lib/IO/Tty.pm cp Tty/Constant.pm blib/lib/IO/Tty/Constant.pm i686-tld-linux-gcc -c -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4 -DVERSION=\"1.10\" -DXS_VERSION=\"1.10\" -fPIC "-I/usr/lib/perl5/5.20.1/i686-tld-linux-thread-multi/CORE" -DHAVE_DEV_PTMX -DHAVE_GETPT -DHAVE_GRANTPT -DHAVE_OPENPTY -DHAVE_POSIX_OPENPT -DHAVE_PTSNAME -DHAVE_PTSNAME_R -DHAVE_PTY_H -DHAVE_SIGACTION -DHAVE_SYS_STROPTS_H -DHAVE_TERMIOS_H -DHAVE_TERMIO_H -DHAVE_TTYNAME -DHAVE_UNLOCKPT Tty.c rm -f blib/arch/auto/IO/Tty/Tty.so LD_RUN_PATH="/usr/lib" i686-tld-linux-gcc -shared -Wl,--no-copy-dt-needed-entries -Wl,-z,relro -Wl,-z,combreloc -L/usr/local/lib -fstack-protector Tty.o -o blib/arch/auto/IO/Tty/Tty.so \ -lutil \ chmod 755 blib/arch/auto/IO/Tty/Tty.so /usr/bin/perl5.20.1 -MExtUtils::Command::MM -e 'cp_nonempty' -- Tty.bs blib/arch/auto/IO/Tty/Tty.bs 644 Manifying blib/man3/IO::Pty.3pm Manifying blib/man3/IO::Tty.3pm Manifying blib/man3/IO::Tty::Constant.3pm + exit 0 Executing(%install): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.858821 /bin/sh -e /tmp/B.858821/rpm-tmp.57235 TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.858821 + umask 022 + cd /home/users/builder/rpm/BUILD + /bin/rm '--interactive=never' -rf /tmp/B.858821/perl-IO-Tty-1.10-root-builder + /bin/mkdir -p /tmp/B.858821/perl-IO-Tty-1.10-root-builder + cd IO-Tty-1.10 + rm -rf /tmp/B.858821/perl-IO-Tty-1.10-root-builder + /usr/bin/make -j4 install 'DESTDIR=/tmp/B.858821/perl-IO-Tty-1.10-root-builder' Running Mkbootstrap for IO::Tty () chmod 644 Tty.bs Appending installation info to /tmp/B.858821/perl-IO-Tty-1.10-root-builder/usr/lib/perl5/5.20.1/i686-tld-linux-thread-multi/perllocal.pod Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /tmp/B.858821/perl-IO-Tty-1.10-root-builder/usr/lib/perl5/vendor_perl/5.20.0/i686-tld-linux-thread-multi/auto/IO/Tty/Tty.so Installing /tmp/B.858821/perl-IO-Tty-1.10-root-builder/usr/lib/perl5/vendor_perl/5.20.0/i686-tld-linux-thread-multi/IO/Tty.pm Installing /tmp/B.858821/perl-IO-Tty-1.10-root-builder/usr/lib/perl5/vendor_perl/5.20.0/i686-tld-linux-thread-multi/IO/Pty.pm Installing /tmp/B.858821/perl-IO-Tty-1.10-root-builder/usr/lib/perl5/vendor_perl/5.20.0/i686-tld-linux-thread-multi/IO/Tty/Constant.pm Installing /tmp/B.858821/perl-IO-Tty-1.10-root-builder/usr/share/man/man3/IO::Tty::Constant.3pm Installing /tmp/B.858821/perl-IO-Tty-1.10-root-builder/usr/share/man/man3/IO::Tty.3pm Installing /tmp/B.858821/perl-IO-Tty-1.10-root-builder/usr/share/man/man3/IO::Pty.3pm + __spec_install_post_strip + set +x Stripping 1 ELF shared libraries...DONE + __spec_install_post_chrpath + set +x Remove RPATH/RUNPATH from 1 executable binaries and shared object files. remove-rpath: /usr/lib in /tmp/B.858821/perl-IO-Tty-1.10-root-builder/usr/lib/perl5/vendor_perl/5.20.0/i686-tld-linux-thread-multi/auto/IO/Tty/Tty.so + __spec_install_post_check_so + set +x Searching for shared objects with unresolved symbols... DONE + __spec_install_post_check_tmpfiles + set +x Checking /var/run <-> tmpfiles.d completeness... DONE + __spec_install_post_compress_docs + set +x Compress man pages: /usr/share/man + __spec_install_post_compress_modules + set +x + __spec_install_post_py_hardlink + set +x + rm -f /tmp/B.858821/perl-IO-Tty-1.10-root-builder/usr/lib/perl5/5.20.1/i686-tld-linux-thread-multi/perllocal.pod /tmp/B.858821/perl-IO-Tty-1.10-root-builder/usr/lib/perl5/vendor_perl/5.20.0/i686-tld-linux-thread-multi/auto/IO/Tty/.packlist Processing files: perl-IO-Tty-1.10-4 Executing(%doc): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.858821 /bin/sh -e /tmp/B.858821/rpm-tmp.84743 + umask 022 + cd /home/users/builder/rpm/BUILD + cd IO-Tty-1.10 + DOCDIR=/tmp/B.858821/perl-IO-Tty-1.10-root-builder/usr/share/doc/perl-IO-Tty-1.10 + export DOCDIR + rm -rf /tmp/B.858821/perl-IO-Tty-1.10-root-builder/usr/share/doc/perl-IO-Tty-1.10 + /bin/mkdir -p /tmp/B.858821/perl-IO-Tty-1.10-root-builder/usr/share/doc/perl-IO-Tty-1.10 + /usr/lib/rpm/compress-doc Compressing documentation in /tmp/B.858821/perl-IO-Tty-1.10-root-builder/usr/share/doc/perl-IO-Tty-1.10... Documentation compressed. + cp -pr ChangeLog README /tmp/B.858821/perl-IO-Tty-1.10-root-builder/usr/share/doc/perl-IO-Tty-1.10 + /usr/lib/rpm/compress-doc Compressing documentation in /tmp/B.858821/perl-IO-Tty-1.10-root-builder/usr/share/doc/perl-IO-Tty-1.10... ./README ./ChangeLog Documentation compressed. + exit 0 Provides: Tty.so perl(IO::Pty) = 1.10 perl(IO::Tty) = 1.10 perl(IO::Tty::Constant) Requires(rpmlib): rpmlib(VersionedDependencies) <= 3.0.3-1 Requires: /usr/lib/perl5/vendor_perl/5.20.0/i686-tld-linux-thread-multi libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.2.1) libc.so.6(GLIBC_2.3.4) libc.so.6(GLIBC_2.4) libutil.so.1 libutil.so.1(GLIBC_2.0) perl(Carp) perl(DynaLoader) perl(Exporter) perl(IO::File) perl(IO::Handle) perl(IO::Tty) perl(IO::Tty::Constant) perl(POSIX) perl(strict) perl(vars) rtld(GNU_HASH) Checking for unpackaged file(s): /usr/lib/rpm/check-files /tmp/B.858821/perl-IO-Tty-1.10-root-builder Wrote: /home/users/builder/rpm/RPMS/perl-IO-Tty-1.10-4.i686.rpm Executing(%clean): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.858821 /bin/sh -e /tmp/B.858821/rpm-tmp.60051 + umask 022 + cd /home/users/builder/rpm/BUILD + cd IO-Tty-1.10 + /bin/rm '--interactive=never' -rf /tmp/B.858821/perl-IO-Tty-1.10-root-builder + rm -rf /tmp/B.858821/perl-IO-Tty-1.10-root-builder ended at: Thu Feb 12 17:51:52 2015, done in 01days 00h 00m 27s mesg: ttyname failed: Inappropriate ioctl for device copy rpm files to cache_dir: /spools/ready Creating pndir index of /spools/ready/ (type=dir)... Loading [pndir]previous /spools/ready/packages.ndir.gz... Loading [dir]/spools/ready/... 200..400..581 Writing /spools/ready/packages.ndir.gz... Begin-PLD-Builder-Info upgrading packages End-PLD-Builder-Info Begin-PLD-Builder-Info Build-Time: user:20.52s sys:15.17s real:32.02s (faults io:0 non-io:1474153) Files queued for ftp: 38199 perl-IO-Tty-1.10-4.i686.rpm 80 perl-IO-Tty-1.10-4.src.rpm.uploadinfo End-PLD-Builder-Info