request from: hawk checking if we should skip the build started at: Sat Aug 24 21:56:30 2019 fetching http://src.tld-linux.org/~buildertidev//srpms/912891d2-b4fa-4bad-9971-6c307ce17ca8/python-attrs-18.2.0-1.src.rpm fetched 121976 bytes, 3300.8 K/s installing srpm: python-attrs-18.2.0-1.src.rpm + install -d /tmp/B.dQXeIk/BUILD /tmp/B.dQXeIk/RPMS + LC_ALL=en_US.UTF-8 + rpm -qp --changelog python-attrs-18.2.0-1.src.rpm * Sat Aug 24 2019 TLD Linux - For complete changelog see: http://git.tld-linux.org/?p=packages/python-attrs.git;a=log;h=e79203eb236ac1a624c2466c35ff0c22361a6b4c * Sat Nov 24 2018 Jakub Bogusz e79203e - updated to 18.2.0 + rpm -Uhv --nodeps --define '_topdir /tmp/B.dQXeIk' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD' python-attrs-18.2.0-1.src.rpm python-attrs ################################################## + rm -f python-attrs-18.2.0-1.src.rpm + install -m 700 -d /tmp/B.dQXeIk/BUILD/tmp + TMPDIR=/tmp/B.dQXeIk/BUILD/tmp + exec nice -n 19 rpmbuild -bp --short-circuit --nodeps --define '_topdir /tmp/B.dQXeIk' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD' --target i686-tld-linux --define 'prep exit 0' /tmp/B.dQXeIk/python-attrs.spec Building target platforms: i686-tld-linux checking BuildConflict-ing packages no BuildConflicts found checking BR rpm: error: Failed build dependencies: rpm: python-coverage is needed by python-attrs-18.2.0-1.src rpm: python-pympler is needed by python-attrs-18.2.0-1.src rpm: python-zope.interface is needed by python-attrs-18.2.0-1.src rpm: python3-coverage is needed by python-attrs-18.2.0-1.src rpm: python3-pympler is needed by python-attrs-18.2.0-1.src rpm: python3-zope.interface is needed by python-attrs-18.2.0-1.src rpm: Building target platforms: i686-tld-linux updating poldek cache... local is up to date Retrieving ti-dev::packages.ndir.md... ti-dev is up to date Retrieving ti-dev::packages.ndir.md... ti-dev is up to date Retrieving ti-dev-test::packages.ndir.md... ti-dev-test is up to date Retrieving ti-dev-test::packages.ndir.md... ti-dev-test is up to date checking conflicting packages in BRed packages poldek: Loading [pndir]local... poldek: Loading [pndir]ti-dev... poldek: Loading [pndir]ti-dev... poldek: Loading [pndir]ti-dev-test... poldek: Loading [pndir]ti-dev-test... poldek: 7814 packages read poldek: Removed 175 duplicate packages from available set poldek: Processing dependencies... poldek: python-zope.interface-4.5.0-2.i686 marks python-zope-base-1.0-3.i686 (cap python-zope-base) poldek: Zope-dirs-1.0-7.i686 obsoleted by python-zope-base-1.0-3.i686 poldek: python3-zope.interface-4.5.0-2.i686 marks python3-zope-base-1.0-3.i686 (cap /usr/lib/python3.7/site-packages/zope) poldek: There are 8 packages to install (2 marked by dependencies), 1 to remove: poldek: I python-coverage-4.5.2-1.i686 python-pympler-0.6-1.noarch poldek: I python-zope.interface-4.5.0-2.i686 python3-coverage-4.5.2-1.i686 poldek: I python3-pympler-0.6-1.noarch python3-zope.interface-4.5.0-2.i686 poldek: D python-zope-base-1.0-3.i686 python3-zope-base-1.0-3.i686 poldek: R Zope-dirs-1.0-7.i686 poldek: This operation will use 7.1MB of disk space. poldek: Need to get 1.2MB of archives (357.8KB to download). poldek: poldek: Retrieving [1/4] ti-dev::python-zope-base-1.0-3.i686.rpm... poldek: ..............................done poldek: Retrieving [2/4] ti-dev::python-zope.interface-4.5.0-2.i686.rpm... poldek: ..............................done poldek: Retrieving [3/4] ti-dev::python3-zope-base-1.0-3.i686.rpm... poldek: ..............................done poldek: Retrieving [4/4] ti-dev::python3-zope.interface-4.5.0-2.i686.rpm... poldek: ..............................done poldek: Executing pm-command.sh --upgrade -vh --test --root / --define _check_dirname_deps 1... poldek: Preparing... ################################################## no conflicts found checking BR rpm: error: Failed build dependencies: rpm: python-coverage is needed by python-attrs-18.2.0-1.src rpm: python-pympler is needed by python-attrs-18.2.0-1.src rpm: python-zope.interface is needed by python-attrs-18.2.0-1.src rpm: python3-coverage is needed by python-attrs-18.2.0-1.src rpm: python3-pympler is needed by python-attrs-18.2.0-1.src rpm: python3-zope.interface is needed by python-attrs-18.2.0-1.src rpm: Building target platforms: i686-tld-linux installing BR: python\-pympler python\-zope\.interface python3\-zope\.interface python3\-coverage python\-coverage python3\-pympler + poldek --noask --caplookup -Q -v --upgrade python-pympler python-zope.interface python3-zope.interface python3-coverage python-coverage python3-pympler Loading [pndir]local... Loading [pndir]ti-dev... Loading [pndir]ti-dev... Loading [pndir]ti-dev-test... Loading [pndir]ti-dev-test... 7814 packages read Removed 175 duplicate packages from available set Processing dependencies... python-zope.interface-4.5.0-2.i686 marks python-zope-base-1.0-3.i686 (cap python-zope-base) Zope-dirs-1.0-7.i686 obsoleted by python-zope-base-1.0-3.i686 python3-zope.interface-4.5.0-2.i686 marks python3-zope-base-1.0-3.i686 (cap /usr/lib/python3.7/site-packages/zope) There are 8 packages to install (2 marked by dependencies), 1 to remove: I python-coverage-4.5.2-1.i686 python-pympler-0.6-1.noarch I python-zope.interface-4.5.0-2.i686 python3-coverage-4.5.2-1.i686 I python3-pympler-0.6-1.noarch python3-zope.interface-4.5.0-2.i686 D python-zope-base-1.0-3.i686 python3-zope-base-1.0-3.i686 R Zope-dirs-1.0-7.i686 This operation will use 7.1MB of disk space. Need to get 1.2MB of archives. Executing pm-command.sh --upgrade -vh --root / --define _check_dirname_deps 1... Preparing... ################################################## python3-coverage ################################################## python-coverage ################################################## python-zope-base ################################################## python3-zope-base ################################################## python-pympler ################################################## python-zope.interface ################################################## python3-pympler ################################################## python3-zope.interface ################################################## building RPM using: set -ex; : build-id: 912891d2-b4fa-4bad-9971-6c307ce17ca8; TMPDIR=/tmp/B.dQXeIk/BUILD/tmp exec nice -n 19 rpmbuild -bb --define '_smp_mflags -j4' --define '_tld_builder 1' --define '_topdir /tmp/B.dQXeIk' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD' --target i686-tld-linux /tmp/B.dQXeIk/python-attrs.spec + : build-id: 912891d2-b4fa-4bad-9971-6c307ce17ca8 + TMPDIR=/tmp/B.dQXeIk/BUILD/tmp + exec nice -n 19 rpmbuild -bb --define '_smp_mflags -j4' --define '_tld_builder 1' --define '_topdir /tmp/B.dQXeIk' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD' --target i686-tld-linux /tmp/B.dQXeIk/python-attrs.spec Building target platforms: i686-tld-linux Executing(%prep): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.dQXeIk/BUILD/tmp /bin/sh -e /tmp/B.dQXeIk/BUILD/tmp/rpm-tmp.94577 + umask 022 + cd /tmp/B.dQXeIk/BUILD + cd /tmp/B.dQXeIk/BUILD + rm -rf attrs-18.2.0 + /usr/bin/gzip -dc /tmp/B.dQXeIk/attrs-18.2.0.tar.gz + /bin/tar -xf - + STATUS=0 + '[' 0 -ne 0 ']' + cd attrs-18.2.0 + /bin/id -u + '[' 10001 '=' 0 ']' + true . + /bin/chmod -Rf -Rf a+rX,u+w,g-w,o-w . + exit 0 Executing(%build): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.dQXeIk/BUILD/tmp /bin/sh -e /tmp/B.dQXeIk/BUILD/tmp/rpm-tmp.94577 TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.dQXeIk/BUILD/tmp + umask 022 + cd /tmp/B.dQXeIk/BUILD + cd attrs-18.2.0 + LDFLAGS='-Wl,--as-needed -Wl,--no-copy-dt-needed-entries -Wl,-z,relro -Wl,-z,combreloc ' + export LDFLAGS + CFLAGS=' -O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4 ' + export CFLAGS + CXXFLAGS=' -O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fomit-frame-pointer -march=i686 -fasynchronous-unwind-tables -mtune=pentium4 ' + export CXXFLAGS + CC=i686-tld-linux-gcc + export CC + CXX=i686-tld-linux-g++ + export CXX + /usr/bin/python setup.py build '--build-base=build-2' running build running build_py creating build-2 creating build-2/lib creating build-2/lib/attr copying src/attr/_funcs.py -> build-2/lib/attr copying src/attr/_compat.py -> build-2/lib/attr copying src/attr/validators.py -> build-2/lib/attr copying src/attr/exceptions.py -> build-2/lib/attr copying src/attr/_config.py -> build-2/lib/attr copying src/attr/__init__.py -> build-2/lib/attr copying src/attr/_make.py -> build-2/lib/attr copying src/attr/filters.py -> build-2/lib/attr copying src/attr/converters.py -> build-2/lib/attr running egg_info writing requirements to src/attrs.egg-info/requires.txt writing src/attrs.egg-info/PKG-INFO writing top-level names to src/attrs.egg-info/top_level.txt writing dependency_links to src/attrs.egg-info/dependency_links.txt reading manifest file 'src/attrs.egg-info/SOURCES.txt' reading manifest template 'MANIFEST.in' warning: no previously-included files found matching '.github/*.md' warning: no previously-included files found matching '.travis.yml' warning: no previously-included files found matching 'codecov.yml' no previously-included directories found matching 'docs/_build' writing manifest file 'src/attrs.egg-info/SOURCES.txt' copying src/attr/__init__.pyi -> build-2/lib/attr copying src/attr/converters.pyi -> build-2/lib/attr copying src/attr/exceptions.pyi -> build-2/lib/attr copying src/attr/filters.pyi -> build-2/lib/attr copying src/attr/py.typed -> build-2/lib/attr copying src/attr/validators.pyi -> build-2/lib/attr + pwd + PYTHONPATH=/tmp/B.dQXeIk/BUILD/attrs-18.2.0/src /usr/bin/python -m pytest tests Traceback (most recent call last): File "/usr/lib/python2.7/runpy.py", line 174, in _run_module_as_main "__main__", fname, loader, pkg_name) File "/usr/lib/python2.7/runpy.py", line 72, in _run_code exec code in run_globals File "/usr/share/python2.7/site-packages/pytest.py", line 9, in from _pytest.config import main, UsageError, cmdline, hookspec, hookimpl File "/usr/share/python2.7/site-packages/_pytest/config/__init__.py", line 17, in File "/usr/share/python2.7/site-packages/_pytest/_code/__init__.py", line 3, in File "/usr/share/python2.7/site-packages/_pytest/_code/code.py", line 10, in from codeop import CommandCompiler, compile_command File "/usr/share/python2.7/site-packages/_pytest/compat.py", line 33, in ImportError: No module named funcsigs error: Bad exit status from /tmp/B.dQXeIk/BUILD/tmp/rpm-tmp.94577 (%build) RPM build errors: Bad exit status from /tmp/B.dQXeIk/BUILD/tmp/rpm-tmp.94577 (%build) ended at: Sat Aug 24 21:56:37 2019, done in 0:00:00.508882 error: No files produced. + chmod -R u+rwX /tmp/B.dQXeIk/BUILD + rm -rf /tmp/B.dQXeIk/tmp /tmp/B.dQXeIk/BUILD + rm -rf /tmp/B.dQXeIk Begin-TLD-Builder-Info Build-Time: user:2.37s sys:0.41s real:7.22s (faults io:0 non-io:154544) End-TLD-Builder-Info