request from: hawk checking if we should skip the build started at: Sat Mar 10 21:44:38 2018 fetching http://kraz.tld-linux.org/~buildertidev//srpms/4496b1c3-66bc-4948-86f6-86ba53f3e6b6/perl-Geo-IP-1.51-1.src.rpm fetched 162038 bytes, 683.5 K/s installing srpm: perl-Geo-IP-1.51-1.src.rpm mesg: ttyname failed: Inappropriate ioctl for device + install -d /tmp/B.yGxC7e/BUILD /tmp/B.yGxC7e/RPMS + LC_ALL=en_US.UTF-8 + rpm -qp --changelog perl-Geo-IP-1.51-1.src.rpm * Sat Mar 10 2018 TLD Linux - For complete changelog see: http://git.tld-linux.org/?p=packages/perl-Geo-IP.git;a=log;h=master * Sat Mar 10 2018 Marcin Krol e223e4f - updated to 1.51 * Sun Jun 11 2017 Jan Rękorajski 29555dd - perl req/prov fix - release 3 (by relup.sh) * Sun Jun 11 2017 Jan Rękorajski 78a5b82 - rebuild with perl 5.26 - release 2 (by relup.sh) * Fri May 19 2017 Mariusz Mazur 32a0ffb - Up to 1.50 + rpm -Uhv --nodeps --define '_topdir /tmp/B.yGxC7e' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD' perl-Geo-IP-1.51-1.src.rpm perl-Geo-IP ################################################## + rm -f perl-Geo-IP-1.51-1.src.rpm mesg: ttyname failed: Inappropriate ioctl for device + install -m 700 -d /tmp/B.yGxC7e/BUILD/tmp mesg: ttyname failed: Inappropriate ioctl for device + TMPDIR=/tmp/B.yGxC7e/BUILD/tmp + exec nice -n 19 rpmbuild -bp --short-circuit --nodeps --define '_topdir /tmp/B.yGxC7e' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD' --target x86_64-tld-linux --define 'prep exit 0' /tmp/B.yGxC7e/perl-Geo-IP.spec Building target platforms: x86_64-tld-linux checking BuildConflict-ing packages no BuildConflicts found checking BR rpm: Building target platforms: x86_64-tld-linux no BR needed building RPM using: set -ex; : build-id: 4496b1c3-66bc-4948-86f6-86ba53f3e6b6; TMPDIR=/tmp/B.yGxC7e/BUILD/tmp exec nice -n 19 rpmbuild -bb --define '_smp_mflags -j8' --define '_tld_builder 1' --define '_topdir /tmp/B.yGxC7e' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD' --target x86_64-tld-linux /tmp/B.yGxC7e/perl-Geo-IP.spec mesg: ttyname failed: Inappropriate ioctl for device + : build-id: 4496b1c3-66bc-4948-86f6-86ba53f3e6b6 + TMPDIR=/tmp/B.yGxC7e/BUILD/tmp + exec nice -n 19 rpmbuild -bb --define '_smp_mflags -j8' --define '_tld_builder 1' --define '_topdir /tmp/B.yGxC7e' --define '_specdir %{_topdir}' --define '_sourcedir %{_specdir}' --define '_rpmdir %{_topdir}/RPMS' --define '_builddir %{_topdir}/BUILD' --target x86_64-tld-linux /tmp/B.yGxC7e/perl-Geo-IP.spec Building target platforms: x86_64-tld-linux Executing(%prep): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.yGxC7e/BUILD/tmp /bin/sh -e /tmp/B.yGxC7e/BUILD/tmp/rpm-tmp.40301 + umask 022 + cd /tmp/B.yGxC7e/BUILD + cd /tmp/B.yGxC7e/BUILD + rm -rf Geo-IP-1.51 + /usr/bin/gzip -dc /tmp/B.yGxC7e/Geo-IP-1.51.tar.gz + /bin/tar -xf - + STATUS=0 + '[' 0 -ne 0 ']' + cd Geo-IP-1.51 + /bin/id -u + '[' 10001 '=' 0 ']' + true . + /bin/chmod -Rf -Rf a+rX,u+w,g-w,o-w . + exit 0 Executing(%build): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.yGxC7e/BUILD/tmp /bin/sh -e /tmp/B.yGxC7e/BUILD/tmp/rpm-tmp.40301 TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.yGxC7e/BUILD/tmp + umask 022 + cd /tmp/B.yGxC7e/BUILD + cd Geo-IP-1.51 + /usr/bin/perl Makefile.PL 'INSTALLDIRS=vendor' Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for Geo::IP Writing MYMETA.yml and MYMETA.json + /usr/bin/make -j8 'CC=x86_64-tld-linux-gcc' 'OPTIMIZE=-O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fPIC -march=x86-64 ' Running Mkbootstrap for IP () "/usr/bin/perl5.26.1" "/usr/share/perl5/5.26.1/ExtUtils/xsubpp" -typemap '/usr/share/perl5/5.26.1/ExtUtils/typemap' -typemap '/tmp/B.yGxC7e/BUILD/Geo-IP-1.51/typemap' IP.xs > IP.xsc chmod 644 "IP.bs" "/usr/bin/perl5.26.1" -MExtUtils::Command::MM -e 'cp_nonempty' -- IP.bs blib/arch/auto/Geo/IP/IP.bs 644 cp lib/Geo/IP.pm blib/lib/Geo/IP.pm cp lib/Geo/IP/Record.pm blib/lib/Geo/IP/Record.pm cp lib/Geo/IP/Record.pod blib/lib/Geo/IP/Record.pod mv IP.xsc IP.c x86_64-tld-linux-gcc -c -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector-strong -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fPIC -march=x86-64 -DVERSION=\"1.51\" -DXS_VERSION=\"1.51\" -fPIC "-I/usr/lib64/perl5/5.26.1/x86_64-tld-linux-thread-multi/CORE" -DPERL_EXT IP.c rm -f blib/arch/auto/Geo/IP/IP.so LD_RUN_PATH="/usr/lib64" x86_64-tld-linux-gcc -shared -Wl,--no-copy-dt-needed-entries -Wl,-z,relro -Wl,-z,combreloc -L/usr/local/lib -fstack-protector-strong IP.o -o blib/arch/auto/Geo/IP/IP.so \ -lGeoIP \ chmod 755 blib/arch/auto/Geo/IP/IP.so Manifying 2 pod documents + exit 0 Executing(%install): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.yGxC7e/BUILD/tmp /bin/sh -e /tmp/B.yGxC7e/BUILD/tmp/rpm-tmp.31660 TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.yGxC7e/BUILD/tmp + umask 022 + cd /tmp/B.yGxC7e/BUILD + /bin/rm '--interactive=never' -rf /tmp/B.yGxC7e/BUILD/tmp/perl-Geo-IP-1.51-root-builder + /bin/mkdir -p /tmp/B.yGxC7e/BUILD/tmp/perl-Geo-IP-1.51-root-builder + cd Geo-IP-1.51 + rm -rf /tmp/B.yGxC7e/BUILD/tmp/perl-Geo-IP-1.51-root-builder + /usr/bin/make -j8 install 'DESTDIR=/tmp/B.yGxC7e/BUILD/tmp/perl-Geo-IP-1.51-root-builder' "/usr/bin/perl5.26.1" -MExtUtils::Command::MM -e 'cp_nonempty' -- IP.bs blib/arch/auto/Geo/IP/IP.bs 644 Manifying 2 pod documents Appending installation info to /tmp/B.yGxC7e/BUILD/tmp/perl-Geo-IP-1.51-root-builder/usr/lib64/perl5/5.26.1/x86_64-tld-linux-thread-multi/perllocal.pod Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /tmp/B.yGxC7e/BUILD/tmp/perl-Geo-IP-1.51-root-builder/usr/lib64/perl5/vendor_perl/5.26.0/x86_64-tld-linux-thread-multi/auto/Geo/IP/IP.so Installing /tmp/B.yGxC7e/BUILD/tmp/perl-Geo-IP-1.51-root-builder/usr/lib64/perl5/vendor_perl/5.26.0/x86_64-tld-linux-thread-multi/Geo/IP.pm Installing /tmp/B.yGxC7e/BUILD/tmp/perl-Geo-IP-1.51-root-builder/usr/lib64/perl5/vendor_perl/5.26.0/x86_64-tld-linux-thread-multi/Geo/IP/Record.pod Installing /tmp/B.yGxC7e/BUILD/tmp/perl-Geo-IP-1.51-root-builder/usr/lib64/perl5/vendor_perl/5.26.0/x86_64-tld-linux-thread-multi/Geo/IP/Record.pm Installing /tmp/B.yGxC7e/BUILD/tmp/perl-Geo-IP-1.51-root-builder/usr/share/man/man3/Geo::IP::Record.3pm Installing /tmp/B.yGxC7e/BUILD/tmp/perl-Geo-IP-1.51-root-builder/usr/share/man/man3/Geo::IP.3pm + /bin/rm '--interactive=never' /tmp/B.yGxC7e/BUILD/tmp/perl-Geo-IP-1.51-root-builder/usr/lib64/perl5/vendor_perl/5.26.0/x86_64-tld-linux-thread-multi/Geo/IP/Record.pod + __spec_install_post_strip + set +x Stripping 1 ELF shared libraries...DONE + __spec_install_post_chrpath + set +x Remove RPATH/RUNPATH from 1 executable binaries and shared object files. remove-rpath: /usr/lib64 in /tmp/B.yGxC7e/BUILD/tmp/perl-Geo-IP-1.51-root-builder/usr/lib64/perl5/vendor_perl/5.26.0/x86_64-tld-linux-thread-multi/auto/Geo/IP/IP.so + __spec_install_post_check_so + set +x Searching for shared objects with unresolved symbols... DONE + __spec_install_post_check_tmpfiles + set +x Checking /var/run <-> tmpfiles.d completeness... DONE + __spec_install_post_compress_docs + set +x Compress man pages: /usr/share/man + __spec_install_post_compress_modules + set +x + __spec_install_post_py_hardlink + set +x + rm -f /tmp/B.yGxC7e/BUILD/tmp/perl-Geo-IP-1.51-root-builder/usr/lib64/perl5/5.26.1/x86_64-tld-linux-thread-multi/perllocal.pod /tmp/B.yGxC7e/BUILD/tmp/perl-Geo-IP-1.51-root-builder/usr/lib64/perl5/vendor_perl/5.26.0/x86_64-tld-linux-thread-multi/auto/Geo/IP/.packlist Processing files: perl-Geo-IP-1.51-1 Executing(%doc): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.yGxC7e/BUILD/tmp /bin/sh -e /tmp/B.yGxC7e/BUILD/tmp/rpm-tmp.31660 + umask 022 + cd /tmp/B.yGxC7e/BUILD + cd Geo-IP-1.51 + DOCDIR=/tmp/B.yGxC7e/BUILD/tmp/perl-Geo-IP-1.51-root-builder/usr/share/doc/perl-Geo-IP-1.51 + export DOCDIR + rm -rf /tmp/B.yGxC7e/BUILD/tmp/perl-Geo-IP-1.51-root-builder/usr/share/doc/perl-Geo-IP-1.51 + /bin/mkdir -p /tmp/B.yGxC7e/BUILD/tmp/perl-Geo-IP-1.51-root-builder/usr/share/doc/perl-Geo-IP-1.51 + /usr/lib/rpm/compress-doc Compressing documentation in /tmp/B.yGxC7e/BUILD/tmp/perl-Geo-IP-1.51-root-builder/usr/share/doc/perl-Geo-IP-1.51... Documentation compressed. + cp -pr Changes /tmp/B.yGxC7e/BUILD/tmp/perl-Geo-IP-1.51-root-builder/usr/share/doc/perl-Geo-IP-1.51 + /usr/lib/rpm/compress-doc Compressing documentation in /tmp/B.yGxC7e/BUILD/tmp/perl-Geo-IP-1.51-root-builder/usr/share/doc/perl-Geo-IP-1.51... ./Changes Documentation compressed. + exit 0 Provides: IP.so()(64bit) perl(Geo::IP) = 1.51 perl(Geo::IP::Record) = 1.51 Requires(rpmlib): rpmlib(VersionedDependencies) <= 3.0.3-1 Requires: /usr/lib64/perl5/vendor_perl/5.26.0/x86_64-tld-linux-thread-multi libGeoIP.so.1()(64bit) libc.so.6()(64bit) libc.so.6(GLIBC_2.2.5)(64bit) perl(Exporter) perl(File::Spec) perl(FileHandle) perl(Geo::IP) perl(Geo::IP::Record) perl(Socket) perl(bytes) perl(constant) perl(strict) perl(vars) rtld(GNU_HASH) Checking for unpackaged file(s): /usr/lib/rpm/check-files /tmp/B.yGxC7e/BUILD/tmp/perl-Geo-IP-1.51-root-builder Wrote: /tmp/B.yGxC7e/RPMS/perl-Geo-IP-1.51-1.x86_64.rpm Executing(%clean): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.yGxC7e/BUILD/tmp /bin/sh -e /tmp/B.yGxC7e/BUILD/tmp/rpm-tmp.79406 + umask 022 + cd /tmp/B.yGxC7e/BUILD + cd Geo-IP-1.51 + /bin/rm '--interactive=never' -rf /tmp/B.yGxC7e/BUILD/tmp/perl-Geo-IP-1.51-root-builder + rm -rf /tmp/B.yGxC7e/BUILD/tmp/perl-Geo-IP-1.51-root-builder ended at: Sat Mar 10 21:44:41 2018, done in 0:00:02.167160 mesg: ttyname failed: Inappropriate ioctl for device + chmod -R u+rwX /tmp/B.yGxC7e/BUILD + rm -rf /tmp/B.yGxC7e/tmp /tmp/B.yGxC7e/BUILD copy rpm files to cache_dir: /spools/ready Creating pndir index of /spools/ready/ (type=dir)... Loading [pndir]previous /spools/ready/packages.ndir.gz... Loading [dir]/spools/ready/... 200..400..600..704 Writing /spools/ready/packages.ndir.gz... Begin-TLD-Builder-Info upgrading packages End-TLD-Builder-Info mesg: ttyname failed: Inappropriate ioctl for device + rm -rf /tmp/B.yGxC7e Begin-TLD-Builder-Info Build-Time: user:2.58s sys:0.22s real:3.19s (faults io:2 non-io:135599) Files queued for ftp: 73606 perl-Geo-IP-1.51-1.x86_64.rpm 82 perl-Geo-IP-1.51-1.src.rpm.uploadinfo End-TLD-Builder-Info