request from: hawk checking if we should skip the build started at: Wed Feb 4 08:52:00 2015 fetching http://kraz.tld-linux.org/~buildertidev//srpms/9bb76c3e-bcff-47a5-a9ab-4734ba14f82f/perl-WWW-Curl-4.15-4.src.rpm fetched 59234 bytes, 252.8 K/s installing srpm: perl-WWW-Curl-4.15-4.src.rpm mesg: ttyname failed: Inappropriate ioctl for device mesg: ttyname failed: Inappropriate ioctl for device mesg: ttyname failed: Inappropriate ioctl for device Building target platforms: x86_64-pld-linux checking BuildConflict-ing packages no BuildConflicts found checking BR rpm: error: Failed build dependencies: rpm: curl-devel is needed by perl-WWW-Curl-4.15-4.src updating poldek cache... local is up to date Retrieving ti-dev::packages.ndir.md... ti-dev is up to date Retrieving ti-dev::packages.ndir.md... ti-dev is up to date Retrieving ti-dev-test::packages.ndir.md... ti-dev-test is up to date Retrieving ti-dev-test::packages.ndir.md... ti-dev-test is up to date checking conflicting packages in BRed packages poldek: Loading [pndir]local... poldek: Loading [pndir]ti-dev... poldek: Loading [pndir]ti-dev... poldek: Loading [pndir]ti-dev-test... poldek: Loading [pndir]ti-dev-test... poldek: 8422 packages read poldek: Removed 429 duplicate packages from available set poldek: Processing dependencies... poldek: curl-devel-7.31.0-1.x86_64 marks curl-libs-7.31.0-1.x86_64 (cap curl-libs = 7.31.0-1) poldek: curl-libs-7.31.0-1.x86_64 marks librtmp-2.3-4.x86_64 (cap librtmp.so.0()(64bit)) poldek: curl-devel-7.31.0-1.x86_64 marks librtmp-devel-2.3-4.x86_64 (cap librtmp-devel) poldek: There are 4 packages to install (3 marked by dependencies): poldek: I curl-devel-7.31.0-1.x86_64 poldek: D curl-libs-7.31.0-1.x86_64 librtmp-2.3-4.x86_64 poldek: D librtmp-devel-2.3-4.x86_64 poldek: This operation will use 871.3KB of disk space. poldek: Need to get 436.4KB of archives (382.0KB to download). poldek: poldek: Retrieving [1/2] ti-dev::curl-libs-7.31.0-1.x86_64.rpm... poldek: ..............................done poldek: Retrieving [2/2] ti-dev::curl-devel-7.31.0-1.x86_64.rpm... poldek: ..............................done poldek: Executing rpm --upgrade -vh --test --root / --define _check_dirname_deps 1... poldek: error: failed to stat /sys/kernel/security: No such file or directory poldek: Preparing... ################################################## no conflicts found checking BR rpm: error: Failed build dependencies: rpm: curl-devel is needed by perl-WWW-Curl-4.15-4.src installing BR: curl\-devel Loading [pndir]local... Loading [pndir]ti-dev... Loading [pndir]ti-dev... Loading [pndir]ti-dev-test... Loading [pndir]ti-dev-test... 8422 packages read Removed 429 duplicate packages from available set Processing dependencies... curl-devel-7.31.0-1.x86_64 marks curl-libs-7.31.0-1.x86_64 (cap curl-libs = 7.31.0-1) curl-libs-7.31.0-1.x86_64 marks librtmp-2.3-4.x86_64 (cap librtmp.so.0()(64bit)) curl-devel-7.31.0-1.x86_64 marks librtmp-devel-2.3-4.x86_64 (cap librtmp-devel) There are 4 packages to install (3 marked by dependencies): I curl-devel-7.31.0-1.x86_64 D curl-libs-7.31.0-1.x86_64 librtmp-2.3-4.x86_64 D librtmp-devel-2.3-4.x86_64 This operation will use 871.3KB of disk space. Need to get 436.4KB of archives. Executing rpm --upgrade -vh --root / --define _check_dirname_deps 1... error: failed to stat /sys/kernel/security: No such file or directory Preparing... ################################################## librtmp ################################################## curl-libs ################################################## librtmp-devel ################################################## curl-devel ################################################## building RPM using: echo build-id: 9bb76c3e-bcff-47a5-a9ab-4734ba14f82f; cd rpm/SPECS; TMPDIR=/tmp/B.bb91fc exec nice -n 19 rpmbuild -bb --define '_smp_mflags -j4' --target x86_64-pld-linux perl-WWW-Curl.spec mesg: ttyname failed: Inappropriate ioctl for device build-id: 9bb76c3e-bcff-47a5-a9ab-4734ba14f82f Building target platforms: x86_64-pld-linux Executing(%prep): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.bb91fc /bin/sh -e /tmp/B.bb91fc/rpm-tmp.65940 + umask 022 + cd /home/users/builder/rpm/BUILD + cd /home/users/builder/rpm/BUILD + rm -rf WWW-Curl-4.15 + /usr/bin/gzip -dc /home/users/builder/rpm/SOURCES/WWW-Curl-4.15.tar.gz + tar -xf - + STATUS=0 + '[' 0 -ne 0 ']' + cd WWW-Curl-4.15 + /bin/id -u + '[' 10001 '=' 0 ']' + true . + /bin/chmod -Rf -Rf a+rX,u+w,g-w,o-w . + exit 0 Executing(%build): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.bb91fc /bin/sh -e /tmp/B.bb91fc/rpm-tmp.65940 TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.bb91fc + umask 022 + cd /home/users/builder/rpm/BUILD + cd WWW-Curl-4.15 + /usr/bin/perl Makefile.PL 'INSTALLDIRS=vendor' Locating required external dependency bin:curl-config... found at /usr/bin/curl-config. The version is libcurl 7.31.0 Found curl.h in /usr/include/curl/curl.h Building curlopt-constants.c for your libcurl version Building Easy.pm constants for your libcurl version Building Share.pm constants for your libcurl version Checking if your kit is complete... Looks good Unrecognized argument in LIBS ignored: '-pthread' Unrecognized argument in LIBS ignored: '-pthread' Generating a Unix-style Makefile Writing Makefile for WWW::Curl Writing MYMETA.yml and MYMETA.json + /usr/bin/make -j4 'CC=x86_64-tld-linux-gcc' 'LD=x86_64-tld-linux-gcc' 'OPTIMIZE=-O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fPIC -march=x86-64 ' 'OTHERLDFLAGS=-Wl,--as-needed -Wl,--no-copy-dt-needed-entries -Wl,-z,relro -Wl,-z,combreloc ' /usr/bin/perl5.20.1 "-Iinc" /usr/share/perl5/5.20.1/ExtUtils/xsubpp -typemap /usr/share/perl5/5.20.1/ExtUtils/typemap -typemap typemap Curl.xs > Curl.xsc && mv Curl.xsc Curl.c Running Mkbootstrap for WWW::Curl () chmod 644 Curl.bs cp lib/WWW/Curl/Share.pm blib/lib/WWW/Curl/Share.pm cp lib/WWW/Curl/Form.pm blib/lib/WWW/Curl/Form.pm cp lib/WWW/Curl/Easy.pm blib/lib/WWW/Curl/Easy.pm cp lib/WWW/Curl.pm blib/lib/WWW/Curl.pm cp lib/WWW/Curl/Multi.pm blib/lib/WWW/Curl/Multi.pm x86_64-tld-linux-gcc -c -I/usr/include -D_REENTRANT -D_GNU_SOURCE -fwrapv -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -fwrapv -pipe -Wformat -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -fstack-protector --param=ssp-buffer-size=4 -fPIC -march=x86-64 -DVERSION=\"4.15\" -DXS_VERSION=\"4.15\" -fPIC "-I/usr/lib64/perl5/5.20.1/x86_64-tld-linux-thread-multi/CORE" Curl.c In file included from Curl.xs:567:0: curlopt-constants.c: In function 'constant': curlopt-constants.c:1882:13: warning: overflow in implicit constant conversion [-Woverflow] if (strEQ(name, "ANY")) return CURLAUTH_ANY; ^ curlopt-constants.c:1883:13: warning: overflow in implicit constant conversion [-Woverflow] if (strEQ(name, "ANYSAFE")) return CURLAUTH_ANYSAFE; ^ rm -f blib/arch/auto/WWW/Curl/Curl.so LD_RUN_PATH="/usr/lib64" x86_64-tld-linux-gcc -shared -Wl,--no-copy-dt-needed-entries -Wl,-z,relro -Wl,-z,combreloc -L/usr/local/lib -fstack-protector Curl.o -Wl,--as-needed -Wl,--no-copy-dt-needed-entries -Wl,-z,relro -Wl,-z,combreloc -o blib/arch/auto/WWW/Curl/Curl.so \ -lcurl -lcares -lidn -lrtmp -lz -lssl -lcrypto -lssh2 -lssl -lcrypto -lgssapi -lheimntlm -lkrb5 -lhx509 -lcom_err -lcrypto -lasn1 -lwind -lheimbase -lroken -lcrypt -ldl -lresolv -llber -lldap -lz \ chmod 755 blib/arch/auto/WWW/Curl/Curl.so /usr/bin/perl5.20.1 "-Iinc" -MExtUtils::Command::MM -e 'cp_nonempty' -- Curl.bs blib/arch/auto/WWW/Curl/Curl.bs 644 Manifying blib/man3/WWW::Curl.3pm + exit 0 Executing(%install): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.bb91fc /bin/sh -e /tmp/B.bb91fc/rpm-tmp.12203 TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.bb91fc + umask 022 + cd /home/users/builder/rpm/BUILD + /bin/rm '--interactive=never' -rf /tmp/B.bb91fc/perl-WWW-Curl-4.15-root-builder + /bin/mkdir -p /tmp/B.bb91fc/perl-WWW-Curl-4.15-root-builder + cd WWW-Curl-4.15 + rm -rf /tmp/B.bb91fc/perl-WWW-Curl-4.15-root-builder + /usr/bin/make -j4 pure_install 'DESTDIR=/tmp/B.bb91fc/perl-WWW-Curl-4.15-root-builder' Running Mkbootstrap for WWW::Curl () chmod 644 Curl.bs Files found in blib/arch: installing files in blib/lib into architecture dependent library tree Installing /tmp/B.bb91fc/perl-WWW-Curl-4.15-root-builder/usr/lib64/perl5/vendor_perl/5.20.0/x86_64-tld-linux-thread-multi/auto/WWW/Curl/Curl.so Installing /tmp/B.bb91fc/perl-WWW-Curl-4.15-root-builder/usr/lib64/perl5/vendor_perl/5.20.0/x86_64-tld-linux-thread-multi/WWW/Curl.pm Installing /tmp/B.bb91fc/perl-WWW-Curl-4.15-root-builder/usr/lib64/perl5/vendor_perl/5.20.0/x86_64-tld-linux-thread-multi/WWW/Curl/Share.pm Installing /tmp/B.bb91fc/perl-WWW-Curl-4.15-root-builder/usr/lib64/perl5/vendor_perl/5.20.0/x86_64-tld-linux-thread-multi/WWW/Curl/Form.pm Installing /tmp/B.bb91fc/perl-WWW-Curl-4.15-root-builder/usr/lib64/perl5/vendor_perl/5.20.0/x86_64-tld-linux-thread-multi/WWW/Curl/Multi.pm Installing /tmp/B.bb91fc/perl-WWW-Curl-4.15-root-builder/usr/lib64/perl5/vendor_perl/5.20.0/x86_64-tld-linux-thread-multi/WWW/Curl/Easy.pm Installing /tmp/B.bb91fc/perl-WWW-Curl-4.15-root-builder/usr/share/man/man3/WWW::Curl.3pm + /bin/rm '--interactive=never' /tmp/B.bb91fc/perl-WWW-Curl-4.15-root-builder/usr/lib64/perl5/vendor_perl/5.20.0/x86_64-tld-linux-thread-multi/auto/WWW/Curl/.packlist + __spec_install_post_strip + set +x Stripping 1 ELF shared libraries...DONE + __spec_install_post_chrpath + set +x Remove RPATH/RUNPATH from 1 executable binaries and shared object files. remove-rpath: /usr/lib64 in /tmp/B.bb91fc/perl-WWW-Curl-4.15-root-builder/usr/lib64/perl5/vendor_perl/5.20.0/x86_64-tld-linux-thread-multi/auto/WWW/Curl/Curl.so + __spec_install_post_check_so + set +x Searching for shared objects with unresolved symbols... DONE + __spec_install_post_check_tmpfiles + set +x Checking /var/run <-> tmpfiles.d completeness... DONE + __spec_install_post_compress_docs + set +x Compress man pages: /usr/share/man + __spec_install_post_compress_modules + set +x + __spec_install_post_py_hardlink + set +x + rm -f /tmp/B.bb91fc/perl-WWW-Curl-4.15-root-builder/usr/lib64/perl5/5.20.1/x86_64-tld-linux-thread-multi/perllocal.pod /tmp/B.bb91fc/perl-WWW-Curl-4.15-root-builder/usr/lib64/perl5/vendor_perl/5.20.0/x86_64-tld-linux-thread-multi/auto/WWW/Curl/.packlist Processing files: perl-WWW-Curl-4.15-4 Executing(%doc): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.bb91fc /bin/sh -e /tmp/B.bb91fc/rpm-tmp.82058 + umask 022 + cd /home/users/builder/rpm/BUILD + cd WWW-Curl-4.15 + DOCDIR=/tmp/B.bb91fc/perl-WWW-Curl-4.15-root-builder/usr/share/doc/perl-WWW-Curl-4.15 + export DOCDIR + rm -rf /tmp/B.bb91fc/perl-WWW-Curl-4.15-root-builder/usr/share/doc/perl-WWW-Curl-4.15 + /bin/mkdir -p /tmp/B.bb91fc/perl-WWW-Curl-4.15-root-builder/usr/share/doc/perl-WWW-Curl-4.15 + /usr/lib/rpm/compress-doc Compressing documentation in /tmp/B.bb91fc/perl-WWW-Curl-4.15-root-builder/usr/share/doc/perl-WWW-Curl-4.15... Documentation compressed. + cp -pr Changes README /tmp/B.bb91fc/perl-WWW-Curl-4.15-root-builder/usr/share/doc/perl-WWW-Curl-4.15 + /usr/lib/rpm/compress-doc Compressing documentation in /tmp/B.bb91fc/perl-WWW-Curl-4.15-root-builder/usr/share/doc/perl-WWW-Curl-4.15... ./README ./Changes Documentation compressed. + exit 0 Provides: Curl.so()(64bit) perl(WWW::Curl) = 4.15 perl(WWW::Curl::Easy) = 4.15 perl(WWW::Curl::Form) = 4.15 perl(WWW::Curl::Multi) perl(WWW::Curl::Share) Requires(rpmlib): rpmlib(VersionedDependencies) <= 3.0.3-1 Requires: /usr/lib64/perl5/vendor_perl/5.20.0/x86_64-tld-linux-thread-multi libc.so.6()(64bit) libc.so.6(GLIBC_2.14)(64bit) libc.so.6(GLIBC_2.15)(64bit) libc.so.6(GLIBC_2.2.5)(64bit) libcurl.so.4()(64bit) perl(Carp) perl(Exporter) perl(WWW::Curl) perl(XSLoader) perl(strict) perl(warnings) rtld(GNU_HASH) Obsoletes: perl-Curl-easy Checking for unpackaged file(s): /usr/lib/rpm/check-files /tmp/B.bb91fc/perl-WWW-Curl-4.15-root-builder Wrote: /home/users/builder/rpm/RPMS/perl-WWW-Curl-4.15-4.x86_64.rpm Executing(%clean): env -i TMP=/home/users/builder/tmp HOME=/home/users/builder PATH=/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/users/builder/bin TMPDIR=/tmp/B.bb91fc /bin/sh -e /tmp/B.bb91fc/rpm-tmp.75671 + umask 022 + cd /home/users/builder/rpm/BUILD + cd WWW-Curl-4.15 + /bin/rm '--interactive=never' -rf /tmp/B.bb91fc/perl-WWW-Curl-4.15-root-builder + rm -rf /tmp/B.bb91fc/perl-WWW-Curl-4.15-root-builder ended at: Wed Feb 4 08:52:20 2015, done in 01days 00h 00m 07s mesg: ttyname failed: Inappropriate ioctl for device copy rpm files to cache_dir: /spools/ready Creating pndir index of /spools/ready/ (type=dir)... Loading [pndir]previous /spools/ready/packages.ndir.gz... Loading [dir]/spools/ready/... 200..389 Writing /spools/ready/packages.ndir.gz... Begin-PLD-Builder-Info upgrading packages End-PLD-Builder-Info Begin-PLD-Builder-Info Build-Time: user:11.26s sys:5.80s real:21.11s (faults io:11 non-io:462340) Files queued for ftp: 49544 perl-WWW-Curl-4.15-4.x86_64.rpm 86 perl-WWW-Curl-4.15-4.src.rpm.uploadinfo End-PLD-Builder-Info